March 29, 2024, 06:55:56 AM

News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com


Recent posts

Pages 1 2 3 4 ... 10
11
Twin Cam / Re: SE Transmission info neede...
Last post by Ohio HD - Yesterday at 04:07:46 PM
Have you looked at the Jim's USA 1060 kit? It's for SE six speeds for 1990 to 2006 bikes.

https://www.jimsusa.com/wp-content/uploads/2019/09/1060-IS.pdf
12
Twin Cam / Re: SE Transmission info neede...
Last post by fbn ent - Yesterday at 03:53:24 PM
Thanks guys but I have the paperwork for that. Like I said, those parts aren't listed or pictured.  :nix: #23 has bearings in it which are in the 5 speed parts books. No mention of the countershaft bearing at all. I'm hoping someone has a line to the MoCo to find out. My counterfolk are pretty green.
13
Twin Cam / Re: SE Transmission info neede...
Last post by FSG - Yesterday at 03:43:20 PM
14
General / Re: M???? in the section
Last post by FSG - Yesterday at 03:29:20 PM
L1009       2024-02-13
15
Twin Cam / Re: SE Transmission info neede...
Last post by xlfan - Yesterday at 03:24:17 PM
I think you can find necessary info on -J03322 in the HD instruction sheet section. I do believe all bearings are stock 5-speed numbers.
16
General / Re: Pro Action Suspension
Last post by biggzed - Yesterday at 12:28:53 PM
Quote from: brent on March 27, 2024, 12:21:39 PMbiggzed did you ever have any clearance problems with the 11 inch shocks


No clearance issues. The bike was an 07 that I put a Native Customs steel rear fender and a 180x55x18" wheel tire combo on. Had the same in the front. Front suspension was Progressive mono-tubes with 2" lowering spacers. It rode good for how low it was. Definitely not the Cadillac ride some people go for. It was firm, but I could ride it all day without feeling beat up and the end.

Zach
 
17
Twin Cam / SE Transmission info needed
Last post by fbn ent - Yesterday at 11:20:10 AM
I have a 33136-04 SE 6 speed overdrive I want to re-bearing....a question:

The mainshaft has a different part number (35058-03) as well as a different 5th gear (35237-03) but uses the same primary bearing race as the 5 speed (34091-85). The number for the 5th gear bearings is not on the parts list. I am assuming 35051-81.
 
The countershaft has a different number also (35059-03) and the primary side bearing in the case is not listed. Again, I assume 8977.

I feel I should be safe getting the stock parts for this as the gears, shafts, shifter fork stuff and gaskets carry a different number as far as I see.

Any input?
18
Audio and Electronics / Re: DTC U1405h ?
Last post by HogMike - March 27, 2024, 03:54:51 PM
Quote from: FLSTFIDave on March 26, 2024, 06:22:13 AMOn my 2019 CVO RG I had an issue with my bike having intermittent issues with Carplay.  I eventually bought a new iPhone to bike usb cord.  Never had an issue again.  The old cord has been in my corvette for 3 years now, never once an issue.  I sure cant explain it.


Thanks, I thought about that as well and got a new cord in there and will do a ride to see if the code will stay away!
I got a couple of spares in my pizza box I'll share with my friends.
19
General / Re: Pro Action Suspension
Last post by brent - March 27, 2024, 12:21:39 PM
biggzed did you ever have any clearance problems with the 11 inch shocks
20
General / Re: JET boring 2005 OEM thrott...
Last post by blown alcohol - March 27, 2024, 12:10:08 PM
I have the Kurykayn throttle body and spacer on the way.

What is a good air cleaner to pair with it?
Big sucker or screamin eagle?
Pages 1 2 3 4 ... 10