March 28, 2024, 06:44:02 AM

News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com


Recent posts

Pages 1 2 3 4 5 ... 10
21
General / Re: Fly by wire module replace...
Last post by Shep236 - March 25, 2024, 06:42:09 PM
Ok thanks.  I wanna buy a cheap gutted one to port match to these heads I bought and just swap guts and go when I go to build the top end.  An intake manifold from an 11 electra should fit my 09 right?  
22
General / Re: Fly by wire module replace...
Last post by harpwrench - March 25, 2024, 06:39:09 PM
Not a whole lot, yes
23
General / Re: Fly by wire module replace...
Last post by Shep236 - March 25, 2024, 06:27:33 PM
Quote from: harpwrench on March 25, 2024, 05:37:47 PMI've done it, take pictures and pay attention to everything
 

Is there alot goin on in there?  Anything have to be clocked when reinstalled?
24
General / Re: Fly by wire module replace...
Last post by harpwrench - March 25, 2024, 05:37:47 PM
I've done it, take pictures and pay attention to everything
25
Twin Cam / Re: cams
Last post by roadkingdresser - March 25, 2024, 05:12:31 PM
Finished putting it together tonight,turned it over with the back wheel.had good compression. Fired right up and sounds good. 1 owner and the grandson bought it from his pap,hasn't been run in 2 years.Started to make that noise when the tensioners are worn thru. nobody has ever had it apart,33553 mi. Oil changes and air filter was only thing done to it.
26
Twin Cam / MOVED: Fly by wire module repl...
Last post by Ohio HD - March 25, 2024, 04:58:31 PM
27
General / Fly by wire module replacement...
Last post by Shep236 - March 25, 2024, 04:54:15 PM
Does anyone know if a man bought a bare throttle body could the guts be replaced with my old one from my 09 electra glide?
28
General / Re: JET boring 2005 OEM thrott...
Last post by blown alcohol - March 25, 2024, 11:26:32 AM
Don said Heads flow 270/218 on his bench.
29
General / Re: JET boring 2005 OEM thrott...
Last post by Coff 06 - March 25, 2024, 11:02:39 AM
Stock 06 compared to the HPI 55.       Coff 06

You cannot see attachments on this board.

You cannot see attachments on this board.
30
General / Re: JET boring 2005 OEM thrott...
Last post by hrdtail78 - March 25, 2024, 10:23:12 AM
The 440 is stock width, 57mm bore and I believe 1.6 ports.

Quote from: Coff 06 on March 25, 2024, 08:44:32 AMOn my 98" build that Don laid out for me.He suggested the
HPI 55/58 with 5.3 injectors and 1.8 intake.
Worked out great in my application.
           Coff 06

Absolutely.  The 55MFI is a great choice.
Pages 1 2 3 4 5 ... 10