April 24, 2024, 06:08:29 PM

News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com

Head Bolts?

Started by Barrett, November 27, 2018, 01:54:20 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Barrett

November 27, 2018, 01:54:20 PM
My S&S heads came with a half of a set (4). I guess they figured people were reusing the old HD ones.
They only come out of the head 1/2". The studs are 1/8" proud. The threads on the studs are 13/8"..
Since I'm buying new bolts I'm thinkin I might as well grab some more thread with longer ones.
Any reason not to?
How are the Diamond bolts?

itsafatboy

November 30, 2018, 01:38:59 PM #1
ARP probably the best , but cost a little bit but the polished 12 point looks nice, not sure on length ,

Barrett

November 30, 2018, 02:08:17 PM #2
https://rssd.cld.bz/S-S-Cycle-Dealer-Catalogue/551/#zoom=z
The ones I have are too short. I have 3/4" more thread available so it isn't going to be a problem fitting the right ones.
There's that much room in the cylinder also.
When I looked at ARP they only showed 2 kits for older Harleys.
User actions
Print
Go Up Pages1