March 28, 2024, 06:40:12 AM

News:


Software levels

Started by johnchev89, October 24, 2018, 05:25:23 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

johnchev89

Maybe the experts can answer this?
Is it possible to use a power vision tune map from a 2016 cvo softail in a 2012 cvo softail.
Have been out of luck finding a base map for my 12 softail convertible.   Fuel moto nor dynojet has one . 
I guess the tbw is what the problem is. 

KE5RBD

Looks like the 12 uses Map based VE table and the 16 uses Throttle position based VE.  Pretty sure it has to have Throttle by wire to be map based.  Power Vision is pretty liberal as to letting swap to different software levels.  The 12 was pre digital and was still analog so very possible you can put a tune for CVO touring on it for 12.  They used 044 software strategy and was Map based ve.  If you have the PV married to the bike you can do a copy of current from bike and use it as base map.  Hopefully one of these will get you going. Looked on SE tuner and your bike uses 025 software level and is Throttle by wire.  Looks like only 12 and 13 had throttle by wire. 

2019 FLHTK Hammock Seat S&S MK 45 Slip ons Street Tuner.

rigidthumper

The 2012 & 2013 Softail CVOs used a 34249-11 ECM, & 025 level calibrations.
The 2016 Softail S models  ( no CVO Softails were made in 2016) used a 41000057 Can Bus ECM, & 617 level calibrations.
So, not compatible.
Ignorance is bliss, and accuracy expensive. How much of either can you afford?

johnchev89

Ok great.  Will start there and compare tunes and map cal's
  Thanks for the info

johnchev89

Quote from: rigidthumper on October 25, 2018, 05:13:33 AM
The 2012 & 2013 Softail CVOs used a 34249-11 ECM, & 025 level calibrations.
The 2016 Softail S models  ( no CVO Softails were made in 2016) used a 41000057 Can Bus ECM, & 617 level calibrations.
So, not compatible.
Found the ecm # 34247-11a

HV

I think as some others have said .....your best bet is to use the PV to pull the stock tune and use it.....unless you have some Big Mods done you should be able to get it close with using this and doing a few Auto Tune runs .... :up:
HV HTT Admin ..Ride Safe ...But Ride informed with HTT !!
Skype HV.HTT

johnchev89

Just exhaust right now , so I will work with the stock tune and then in december I'm doing cams and compression.
Wes at cycle rama will be doing the tune for me.

joe_lyons

Powerhouse Cycle & Dyno - Performance is our passion 816-425-4901


joe_lyons

It's just a decent starting point, better than stock Cal but needs massaged.
Powerhouse Cycle & Dyno - Performance is our passion 816-425-4901