Author Topic: 2017, 124", FLTRXS, Stage 3, CR-462 torque build  (Read 2127 times)

0 Members and 1 Guest are viewing this topic.

Offline Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4300
  • Country: us
2017, 124", FLTRXS, Stage 3, CR-462 torque build
« on: November 28, 2018, 09:42:25 AM »
This is the one I posted in the testing thread.

Stock heads and throttle body on this one.

The torque on tap is nothing short of amazing, just twist the grip and GO!

  [ You are not allowed to view attachments ]  
 
« Last Edit: November 28, 2018, 09:49:29 AM by Coyote »

Offline 1workinman

  • Site Supporter
  • Full Member
  • *****
  • Posts: 1090
  • Country: us
Re: 2017, 124", FLTRXS, Stage 3, CR-462 torque build
« Reply #1 on: November 28, 2018, 04:16:47 PM »
 :agree:

Offline Tail Ridr

  • Full Member
  • Posts: 100
  • Country: us
Re: 2017, 124", FLTRXS, Stage 3, CR-462 torque build
« Reply #2 on: November 29, 2018, 02:20:27 AM »
 I can't even imagine... :chop:
Eliminate the Imperfections of mass production!

Offline scott7d

  • Full Member
  • Posts: 122
  • Country: us
Re: 2017, 124", FLTRXS, Stage 3, CR-462 torque build
« Reply #3 on: November 29, 2018, 01:13:52 PM »
Put a plow on the front and make extra money doing snow removal this winter!

Offline sfmichael

  • Site Supporter
  • Full Member
  • *****
  • Posts: 5768
  • Country: us
  • Hoping to build the next mighty 'mouse'
Re: 2017, 124", FLTRXS, Stage 3, CR-462 torque build
« Reply #4 on: December 06, 2018, 07:49:18 AM »
looks fantastic  :up: :up:...will you follow this recipe for yours (or is this yours)?

P.S. I just looked at your other post and see that this is yours - looks like fun!!  :chop:
« Last Edit: December 06, 2018, 07:58:04 AM by sfmichael »
Colorado Springs, CO.

Offline No Cents

  • Full Member
  • Posts: 8264
  • Country: us
  • there is no cure for what I got !
Re: 2017, 124", FLTRXS, Stage 3, CR-462 torque build
« Reply #5 on: December 07, 2018, 06:26:24 AM »
  that poor back tire  :smilep:
I bet your liking this set up "way" better than how you first got it from the dealership when it was bone stock.  :wink:
  Keep up the great work!
08 FLHX my grocery getter, 124ci, wfolarry 110" heads, Burns pipe, 158/152 sae

Offline Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4300
  • Country: us
Re: 2017, 124", FLTRXS, Stage 3, CR-462 torque build
« Reply #6 on: December 07, 2018, 08:45:43 AM »
looks fantastic  :up: :up:...will you follow this recipe for yours (or is this yours)?

P.S. I just looked at your other post and see that this is yours - looks like fun!!  :chop:
It's a blast to ride.
  that poor back tire  :smilep:
I bet your liking this set up "way" better than how you first got it from the dealership when it was bone stock.  :wink:
  Keep up the great work!
Just a smidge better than stock Ray. :teeth:

I could have went right to a bigger throttle body and more right side cam from the get go, and still will, one part at a time.

Wes sent me the 462 to use in a 107 but I already had the 124 kit just about finished, so I tossed it in. Lol

Offline No Cents

  • Full Member
  • Posts: 8264
  • Country: us
  • there is no cure for what I got !
Re: 2017, 124", FLTRXS, Stage 3, CR-462 torque build
« Reply #7 on: December 07, 2018, 11:22:15 AM »
 at what point are you putting a pro charger on it?   :potstir:
08 FLHX my grocery getter, 124ci, wfolarry 110" heads, Burns pipe, 158/152 sae

Offline sfmichael

  • Site Supporter
  • Full Member
  • *****
  • Posts: 5768
  • Country: us
  • Hoping to build the next mighty 'mouse'
Re: 2017, 124", FLTRXS, Stage 3, CR-462 torque build
« Reply #8 on: December 09, 2018, 08:16:49 PM »
at what point are you putting a pro charger on it?   :potstir:

  :hyst:
Colorado Springs, CO.

Offline Clayton24

  • Full Member
  • Posts: 183
  • Country: us
Re: 2017, 124", FLTRXS, Stage 3, CR-462 torque build
« Reply #9 on: January 06, 2019, 10:25:28 AM »
My god what a touring or trike setup ! Looks awesome

Offline BVHOG

  • Site Supporter
  • Full Member
  • *****
  • Posts: 3487
  • Country: 00
Re: 2017, 124", FLTRXS, Stage 3, CR-462 torque build
« Reply #10 on: January 25, 2019, 05:54:33 PM »
I had to comment just to get this one back to the top, THIS is what a street torque curve should look like, Hell you could pull away in 4th gear from a stop, lol
If you don't have a sense of humor you probably have no sense at all.

Offline 838

  • Site Supporter
  • Full Member
  • *****
  • Posts: 137
  • Country: us
Re: 2017, 124", FLTRXS, Stage 3, CR-462 torque build
« Reply #11 on: January 30, 2019, 11:59:53 AM »
Unreal. Straight up bolt on too?

Offline Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4300
  • Country: us
Re: 2017, 124", FLTRXS, Stage 3, CR-462 torque build
« Reply #12 on: January 30, 2019, 01:02:46 PM »
Unreal. Straight up bolt on too?
Other than correcting the deck height, yes.

Offline fairlydangerous1

  • Member
  • Posts: 27
Re: 2017, 124", FLTRXS, Stage 3, CR-462 torque build
« Reply #13 on: February 04, 2019, 02:14:13 PM »
Clutch wise, are you just using heavier springs and 10 disk?  Wondering if my 1275N Se springs would hold this?

Two up, loaded up, mountains riding dream right there.

Offline Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4300
  • Country: us
Re: 2017, 124", FLTRXS, Stage 3, CR-462 torque build
« Reply #14 on: February 05, 2019, 04:14:46 AM »
Clutch wise, are you just using heavier springs and 10 disk?  Wondering if my 1275N Se springs would hold this?

Two up, loaded up, mountains riding dream right there.
This graph is with 9 frictions and Barnett Red springs and was on the edge as far as holding. I recently installed a 10 friction clutch that should hold it.

Offline Goober

  • Member
  • Posts: 3
  • Country: au
Re: 2017, 124", FLTRXS, Stage 3, CR-462 torque build
« Reply #15 on: February 05, 2019, 09:39:43 PM »
Mr Durwood Sir was this with stock injectors ?

Offline Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4300
  • Country: us
Re: 2017, 124", FLTRXS, Stage 3, CR-462 torque build
« Reply #16 on: February 10, 2019, 08:17:42 AM »
Mr Durwood Sir was this with stock injectors ?
No.

Offline Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4300
  • Country: us
Re: 2017, 124", FLTRXS, Stage 3, CR-462 torque build
« Reply #17 on: February 10, 2019, 08:38:38 AM »
I sourced the injectors through FiveO Motorsports. They actually test each injector to ensure proper operation.