Author Topic: Baker speedo sensor  (Read 234 times)

0 Members and 1 Guest are viewing this topic.

Offline HotRodShovel

  • Site Supporter
  • Full Member
  • *****
  • Posts: 2341
  • Country: us
  • NYC/S.FL
Baker speedo sensor
« on: January 11, 2019, 05:50:25 AM »
My Baker transmission has a port for a speedo sensor.  Im not sure what ratio I would need in an electronic speedo to attach to it.  I def want to get a mini speedo on that bike for obvious reasons.

I suppose I could get a call into Baker, and I will but in the mean time I'm betting someone out there has already gone thru this and can help me out with the process.

As always, thank you..
Sometimes life is like trying to share a sandwich with Rosie O'Donnell. 
John

Offline koko3052

  • Full Member
  • Posts: 5550
  • Country: ca
Re: Baker speedo sensor
« Reply #1 on: January 11, 2019, 06:47:30 AM »
I don't have any direct info but when I put Baker's DD6 into my '05 Fatboy & used the adjustable sensor that was sent with the kit, I was able to adjust my factory speedo to the exact speed as was shown on my GPS. I'm thinking if you could find a "mini", that was the same ratio as the original, and then use Baker's adjustable sensor, that you would be right on the money.

Offline HotRodShovel

  • Site Supporter
  • Full Member
  • *****
  • Posts: 2341
  • Country: us
  • NYC/S.FL
Re: Baker speedo sensor
« Reply #2 on: January 11, 2019, 10:27:52 PM »
Thanks Koko.  My 6 in 4 did not come with a sensor but is 'ready'.  I think I'll give Baker a call and hopefully they will point me in the right direction
Sometimes life is like trying to share a sandwich with Rosie O'Donnell. 
John