Author Topic: Rockout Rocker Inserts  (Read 9140 times)

0 Members and 1 Guest are viewing this topic.

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Rockout Rocker Inserts
« on: December 06, 2015, 02:35:39 PM »
Hello all...

 I'm very happy to be a new forum sponsor here at HTT. My former username was Bikerscum, that guy that found & cured the tapping problem in the top end of Twin Cam bikes. That research and development has resulted in my own product to make that annoying tapping go away... Rockout rocker inserts. These have been a huge success with sales in the US, Canada, Germany, UK, Australia, etc.. I hear from stoked bikers all the time that were ready to give up hope until they found Rockouts!

 Please take a moment to check out my website.... www.rockout.biz

 There you'll find installation and ordering information, and if you have any questions please just drop me a note here or at my email rock-out@att.net

 Thanks for having me  :smile:

 John @ Rockout

                       
www.rockout.biz Stop the top end TAPPING!!

Offline Ohio HD

  • Professional Cat Herder
  • Administrator
  • Full Member
  • *****
  • Posts: 19507
  • Country: us
  • OH CRAP!
Re: Rockout Rocker Inserts
« Reply #1 on: December 06, 2015, 03:11:18 PM »
I bought a set to try out next time I do something to the 117 inch. They shipped and arrived very fast, look to be well made too. 
For the best deal on bike parts, call Calif Phil
     www.harleypartscheap.com

Offline harleytuner

  • Full Member
  • Posts: 3017
  • Country: us
    • Wide Open Cycles
Re: Rockout Rocker Inserts
« Reply #2 on: December 06, 2015, 03:13:43 PM »
Congrats John and kudos on the good work.  Ill check out the site and be in contact with you soon. :up:
Enjoying the hell out of my "hotted" up twincam

Offline IRONMIKE113

  • Site Supporter
  • Full Member
  • *****
  • Posts: 2272
  • Country: us
Re: Rockout Rocker Inserts
« Reply #3 on: December 06, 2015, 04:41:43 PM »
Welcome aboard,I have read good things about your Products,wish you well here....... 🇺🇸
2 Bikes and 2 Beemers, that's what I have been told 😳

Offline SLAATY

  • Full Member
  • Posts: 246
  • Country: us
Re: Rockout Rocker Inserts
« Reply #4 on: December 06, 2015, 04:53:53 PM »
Hey John, best of luck here! Just joined this site myself, and wondering why I didn't check it out before this.

They haven't arrived, but it's only been a couple of days and I don't have the 585's yet anyway...

You've got a solid product that's going to help a lot of us with the top end knock. Mine reminds me of woodblocks being played.

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #5 on: December 06, 2015, 05:15:19 PM »
Thanks guys for the warm welcome  :up:

 If I can answer any questions or help in any way just holler.

 John
www.rockout.biz Stop the top end TAPPING!!

Offline BUBBIE

  • Locked
  • Full Member
  • Posts: 5557
  • Country: us
  • 09 FLHR KING / 06 sport 1200 R
Re: Rockout Rocker Inserts
« Reply #6 on: December 07, 2015, 08:05:21 AM »
 :up: Welcome,

Glad to see you have a place to sell these units... :SM:

Should do great here, I'll be trying to send you business too... Not me for right now But for the many here on this site AND other places... Talk helps... :speaker:

signed....BUBBIE
***********************
Quite Often I am Right, so Forgive me when I'm WRONG !!!

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #7 on: December 07, 2015, 10:02:42 AM »
Thanks Bubbie, every bit helps. You're right, talk isn't just important, it's critical.

 'Course it's up to me to make sure the talk is positive  :smile:

 So far the feedback has been awesome  :up:
www.rockout.biz Stop the top end TAPPING!!

Offline jmorton10

  • Full Member
  • Posts: 2623
  • Country: us
  • support your local HAMC
Re: Rockout Rocker Inserts
« Reply #8 on: December 07, 2015, 10:57:50 AM »
Good luck guys, love to see new vendors. :koolaid:

~John
HC 124", Dragula, Pingel air shift W/Dyna Shift Minder & onboard compressor, NOS

Offline 2006FXDCI

  • Full Member
  • Posts: 2531
  • Country: 00
  • Born to lose
Re: Rockout Rocker Inserts
« Reply #9 on: December 07, 2015, 05:19:27 PM »
Do the rockout rocker lockers work with the SE forged rocker supports ?
2006 Super glide 107" , 2005 electra glide 124"

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #10 on: December 07, 2015, 06:22:32 PM »
Do the rockout rocker lockers work with the SE forged rocker supports ?


 That's a great question, one that comes up from time to time. The answer is..... I've been told they do. I hesitate to make claims on something I don't hold in my hand, but the guy who tested them is solid. He sent me some pics.... a few of the support/shaft and one of the Rockouts installed. I don't know if it makes any difference but this was on a 110 CVO...









 The guy said it absolutely stopped the rocking. Still, I would like to see another confirmation that they fit before I state a definite yes. If you're up for it PM me & I'll send you a free set, I only ask for an honest evaluation.

 Thanks for the interest  :up:
www.rockout.biz Stop the top end TAPPING!!

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #11 on: December 08, 2015, 04:47:20 AM »
FXD, your kit is on the way.

 Thanks man,

 John
www.rockout.biz Stop the top end TAPPING!!

Offline 2006FXDCI

  • Full Member
  • Posts: 2531
  • Country: 00
  • Born to lose
Re: Rockout Rocker Inserts
« Reply #12 on: December 08, 2015, 06:07:59 AM »
Thank you John ! Cant wait to try them out . I will post my results here on how they work with the SE supports .
2006 Super glide 107" , 2005 electra glide 124"

Offline hotbo

  • Site Supporter
  • Full Member
  • *****
  • Posts: 773
  • Country: 00
Re: Rockout Rocker Inserts
« Reply #13 on: December 08, 2015, 06:14:52 AM »
Just ordered 2 sets.1 for me and 1 for my wife's.cant wait to try them,thanks Travis   :beer:
03 fatty 124"  S&S Super G/Bored w/T-jet,Dragos Softail Exh.

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #14 on: December 08, 2015, 09:03:37 AM »
Thanks man, please let us know how they work out for you.

 John
www.rockout.biz Stop the top end TAPPING!!

Offline Sc00ter

  • Full Member
  • Posts: 1113
  • Country: 00
Re: Rockout Rocker Inserts
« Reply #15 on: December 13, 2015, 04:11:54 PM »
Just ordered a set...  Good timing, as my motor is apart for a winter freshening up!   :up:

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #16 on: December 13, 2015, 04:16:43 PM »
Thank you very much for your order   :up:
www.rockout.biz Stop the top end TAPPING!!

Offline kbnet300

  • Member
  • Posts: 3
  • Country: us
Re: Rockout Rocker Inserts
« Reply #17 on: December 14, 2015, 07:50:39 AM »
Last Week I installed the Rocker Inserts in my 02 Road King.
Prior to install sounded like a handful of nuts in the front rocker box.
After install .......... Amazing difference on idle and running down the road.
Well worth the time and effort to install. Excellent product.

 :chop:

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #18 on: December 14, 2015, 09:09:06 AM »
That's great to hear :up:

 Thanks for your order, and for the feedback.

 John
www.rockout.biz Stop the top end TAPPING!!

Offline 2006FXDCI

  • Full Member
  • Posts: 2531
  • Country: 00
  • Born to lose
Re: Rockout Rocker Inserts
« Reply #19 on: December 14, 2015, 06:42:11 PM »
Received my rockout lockers today ! I will be installing them as soon as i get my engine components back . Thanks again John !
2006 Super glide 107" , 2005 electra glide 124"

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #20 on: December 15, 2015, 04:37:34 AM »
Thanks man.

 Now who wants to try some on a Sportster or EVO? If you have the components laying around & can check for fit & function please let me know  :up:
www.rockout.biz Stop the top end TAPPING!!

Offline joe_lyons

  • Administrator
  • Full Member
  • *****
  • Posts: 5089
  • Country: us
  • Just another squirrel trying to get a nut.
    • Powerhouse Cycle & Dyno
Re: Rockout Rocker Inserts
« Reply #21 on: December 15, 2015, 06:04:45 AM »
I have a sportster rocker support plate apart at work I can measure for you on Thursday if you want
Powerhouse Cycle & Dyno - Performance is our passion
816-425-4901

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #22 on: December 15, 2015, 09:05:17 AM »
That would be awesome Joe, thank you.

 If you'd like to PM me a shipping address, I'll send you a kit to try..... see if it will fit, if not, why not, etc.

Also anyone else that would be willing to help out.

 Thanks again,

 John
www.rockout.biz Stop the top end TAPPING!!

Offline fidel

  • Full Member
  • Posts: 231
  • Country: ca
Re: Rockout Rocker Inserts
« Reply #23 on: December 16, 2015, 04:05:42 PM »
I just send you an email I wan try ur kit  thanks in advance

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #24 on: December 16, 2015, 07:37:06 PM »
Sorry, I haven't received any emails or PM's from you.

 BTW is this for a Sportster or EVO? SE forged support?
www.rockout.biz Stop the top end TAPPING!!

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #25 on: December 17, 2015, 04:40:19 AM »
Sorry Fidel, I did get your email.... thanks.

 John
www.rockout.biz Stop the top end TAPPING!!

Offline fidel

  • Full Member
  • Posts: 231
  • Country: ca
Re: Rockout Rocker Inserts
« Reply #26 on: December 17, 2015, 02:01:07 PM »
its for a twin cam payment send

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #27 on: December 17, 2015, 06:29:51 PM »
Got it, thanks. Packed up, will ship tomorrow.

 John
www.rockout.biz Stop the top end TAPPING!!

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #28 on: December 26, 2015, 08:08:35 AM »
Still looking for volunteers to try Rockouts in Sportsters & Evos. All you have to lose is the tapping  :up:

 Happy holidays from all of us at Rockout  :beer: :beer:
www.rockout.biz Stop the top end TAPPING!!

Offline turboprop

  • Site Supporter
  • Full Member
  • *****
  • Posts: 3408
  • Country: 00
Re: Rockout Rocker Inserts
« Reply #29 on: December 26, 2015, 08:28:57 AM »
Has anyone tried these in S&S billet or cast rocker boxes?
'Never try to teach a pig to sing, it only wastes your time and annoys the pig'.

Offline joe_lyons

  • Administrator
  • Full Member
  • *****
  • Posts: 5089
  • Country: us
  • Just another squirrel trying to get a nut.
    • Powerhouse Cycle & Dyno
Re: Rockout Rocker Inserts
« Reply #30 on: December 26, 2015, 04:32:55 PM »
Just wanted to let others know that these worked in sportster rocker support plates.  I just did the front support plate(warranty job) and there is a noticeable difference between front and rear where both were noisy before.
2015 XL1200 1600 miles.
Powerhouse Cycle & Dyno - Performance is our passion
816-425-4901

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #31 on: December 26, 2015, 04:39:08 PM »
Just wanted to let others know that these worked in sportster rocker support plates.  I just did the front support plate(warranty job) and there is a noticeable difference between front and rear where both were noisy before.
2015 XL1200 1600 miles.

 That's great to hear!

 So school me on Sportsters a little.... are they like twin cam engines in that the rocker assemblies are all the same... 883, 1200, etc? All years or only some?

 Would you change anything about the kit to make it work better in Sportsters?

 Thanks again for your help, very much appreciated.

 John
www.rockout.biz Stop the top end TAPPING!!

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #32 on: December 26, 2015, 04:45:29 PM »
Has anyone tried these in S&S billet or cast rocker boxes?
I don't know about the S&S assemblies. They do work in all twin cam, and SE forged. I have heard they are a little too small for Woods offset supports, but I'm working on that.

 If you have the S&S assemblies & want to be a tester, let me know.

 
 John
www.rockout.biz Stop the top end TAPPING!!

Offline FSG

  • BrisVegas in Oz
  • Administrator
  • Full Member
  • *****
  • Posts: 16994
  • Country: au
  • BrisVegas
Re: Rockout Rocker Inserts
« Reply #33 on: December 26, 2015, 05:26:02 PM »
Quote
So school me on Sportsters a little.... are they like twin cam engines in that the rocker assemblies are all the same... 883, 1200, etc? All years or only some?


Sportsters with the Evo Engine use the same Rocker Shafts and Rocker Arms that all Big Twin Evo and TCs use.  But like the Big Twin Evo their support is built in to the Inner Rocker Cover and they use different bolts to a TC.

http://harleytechtalk.com/index.php/topic,87675.msg996752.html#msg996752
« Last Edit: November 17, 2017, 06:55:07 PM by FSG »

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #34 on: December 26, 2015, 05:34:11 PM »
Quote
So school me on Sportsters a little.... are they like twin cam engines in that the rocker assemblies are all the same... 883, 1200, etc? All years or only some?


Sportsters with the Evo Engine use the same Rocker Shafts and Rocker Arms that all Big Twin Evo and TCs use.  But like the Big Twin Evo their support is built in to the Inner Rocker Cover and they use different bolts to a TC.

http://harleytechtalk.com/index.php/topic,87675.msg996752.html#msg996752


 Great information, thank you.

 Since Joe said my inserts worked on his Sporster, I have to assume at least the bolt diameter is the same?

« Last Edit: November 17, 2017, 06:59:27 PM by FSG »
www.rockout.biz Stop the top end TAPPING!!

Offline FSG

  • BrisVegas in Oz
  • Administrator
  • Full Member
  • *****
  • Posts: 16994
  • Country: au
  • BrisVegas
Re: Rockout Rocker Inserts
« Reply #35 on: December 26, 2015, 06:11:35 PM »
Quote
Since Joe said my inserts worked on his Sporster, I have to assume at least the bolt diameter is the same?

Yes the Sportsters started using the same bolts as the TCs in 2001 or 2002, but I'd still like someone to put a P/N 3500A (Evo) alongside a P/N 1039 (TC) and measure the diameter of the bolt where it passes through the notch.

Offline turboprop

  • Site Supporter
  • Full Member
  • *****
  • Posts: 3408
  • Country: 00
Re: Rockout Rocker Inserts
« Reply #36 on: December 26, 2015, 07:25:21 PM »
Has anyone tried these in S&S billet or cast rocker boxes?
I don't know about the S&S assemblies. They do work in all twin cam, and SE forged. I have heard they are a little too small for Woods offset supports, but I'm working on that.

 If you have the S&S assemblies & want to be a tester, let me know.

 
 John

I have the both types of rocker boxes and will try them on the next build using the case boxes. Will post the results here and if needed any adjustments. My knee jerk reaction is to hope the bolt holes in the S&S supports are slightly smaller than the harley supports and can have enough material to allow them to be reamed to the proper size to use these.
'Never try to teach a pig to sing, it only wastes your time and annoys the pig'.

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #37 on: December 26, 2015, 08:52:56 PM »
Has anyone tried these in S&S billet or cast rocker boxes?
I don't know about the S&S assemblies. They do work in all twin cam, and SE forged. I have heard they are a little too small for Woods offset supports, but I'm working on that.

 If you have the S&S assemblies & want to be a tester, let me know.

 
 John

I have the both types of rocker boxes and will try them on the next build using the case boxes. Will post the results here and if needed any adjustments. My knee jerk reaction is to hope the bolt holes in the S&S supports are slightly smaller than the harley supports and can have enough material to allow them to be reamed to the proper size to use these.

 Please PM me your name & shipping address & I'll send some your way.

 Thanks,

 John
www.rockout.biz Stop the top end TAPPING!!

Offline VALLEY

  • Full Member
  • Posts: 197
  • Country: us
Re: Rockout Rocker Inserts
« Reply #38 on: December 27, 2015, 07:50:16 AM »
Great fix. Do they remove easily if you have to replace shafts?

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #39 on: December 27, 2015, 07:55:17 AM »
They tap out from the bottom. Since they're tapered they push right out once you move them a short distance. You need a sharp round punch so it catches the edge of the insert rather than slipping past it.

 Most times you can reuse them, sometimes not if the edges get buggered.
www.rockout.biz Stop the top end TAPPING!!

Offline VIN1800

  • Member
  • Posts: 1
  • Country: us
Re: Rockout Rocker Inserts
« Reply #40 on: December 27, 2015, 03:04:09 PM »
Installed them on my 2012 Street Bob, nice and quit now.

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #41 on: December 27, 2015, 03:13:03 PM »
Installed them on my 2012 Street Bob, nice and quit now.

 That's great to hear!

 Thank you for your purchase and your feedback.

 John
www.rockout.biz Stop the top end TAPPING!!

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #42 on: January 03, 2016, 08:30:47 AM »
Hey all,

 Just  quick update in the Rockout world...

 Been kinda out of it, taking a break for the holidays. My day job gets pretty hectic this time of year. Still, I haven't been slacking (much) :)

 Had a request to make some inserts for Woods offset supports. Initially not something I plan to offer as I have to figure the volume would be pretty low. But a couple of brothers were in a bind so I made a few up...





 Then I noticed an old Sportster rocker box I had laying around and...



.... we'll see... :)

 I make the regular Twin Cam inserts at about 1000/hour, these .... um... slower than that. lol But if they are a universal fit then that opens up possibilities.

 Speaking of Sportsters, anyone wanting to test out some Rockouts in theirs just let me know.... I'll be offering these soon & woud like to get some feedback.

 
 I've got some exciting new stuff in the works, including a completely new design. Have to keep quiet for now until patent approval... my ideas seem to migrate to other's products.

 Speaking of which...

 There seems to be some confusion about the origins of my installation method, let me clear that up...

 One of the great things about the internet is it provides a historical record. Things that can't be argued or changed. Here's some data...

 It's no secret that the original rocker inserts were a joint venture of myself and another party. That joint venture ended here... 8-26-15 post #152 http://www.hdforums.com/forum/new-rushmore-models/1058869-the-tapping-the-quest-is-over-16.html The post directly above that shows the product at that time. I was (and am) 50% owner of that product as marketed, including the patent rights to it. Notice the contents of the kit. The installation method at that time was to loosen all the support bolts while still on the bike, let the plate rise up and install the inserts there. I still have one of those kits and the instructions here in front of me. There was also a video at the time showing hammering them in with a ball peen hammer on the bench.

 I announced my own Rockout kit on 9-4-15 in post #176 here...

 http://www.hdforums.com/forum/new-rushmore-models/1058869-the-tapping-the-quest-is-over-18.html post #176. (BTW, my username there at the time was Bikerscum). Notice the contents listed in my kit...

"The kit includes the inserts, 2 Viton O-rings, simple installation hardware, & complete instructions."

 
Here is a picture of my kit as introduced and the other kit at that time...

 

 In fact, my kit was so different I started a whole new thread about the installation method here... http://www.hdforums.com/forum/touring-models/1074778-a-word-about-installing-rockout-rocker-shaft-inserts.html

As I said, this is all verifiable history, nothing to argue about. If you see another kit with the 2 o-rings, a nut & a washer in it the method was copied from me, plain & simple.

 It is easy to say you're the first, a lot harder to be the first.

 Fact... I found & cured the Harley top end tapping problem, first.
 
 Fact... I was 50% responsible for bringing the first commercial product to market to solve that problem.

 Fact... I developed the installation method in widespread use today.

 I hope this clears up any confusion.

 Now off to the shop....

 

« Last Edit: November 17, 2017, 07:01:37 PM by FSG »
www.rockout.biz Stop the top end TAPPING!!

Offline Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4238
  • Country: us
Re: Rockout Rocker Inserts
« Reply #43 on: January 03, 2016, 09:36:27 AM »
I just used your product in my last customer build and ordered an extra set for the shop mule.

Hat's off to "tapping" into a long existing but never commercially addressed issue. Pardon the pun. :teeth:

BTW nice product.

Daren

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #44 on: January 03, 2016, 10:14:02 AM »
Thanks Daren, your support is very much appreciated.

 John
www.rockout.biz Stop the top end TAPPING!!

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Spy photo
« Reply #45 on: January 03, 2016, 12:01:37 PM »
Just a quick spy photo from the Rockout R&D dept....



 While it's fun to theorize about things, I have a pretty good grasp of what is, and just as importantly what IS NOT going on in there :)

 Back to work...
www.rockout.biz Stop the top end TAPPING!!

Offline Tattoo

  • Full Member
  • Posts: 1961
  • Country: 00
Re: Rockout Rocker Inserts
« Reply #46 on: January 06, 2016, 05:11:44 PM »
will they work with The Screaming Eagle rocker support?
"You can have anything you want
But you better not take it from me"

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #47 on: January 06, 2016, 05:17:19 PM »
will they work with The Screaming Eagle rocker support?

 Yessir, just like the stock supports.

 John @ Rockout.
www.rockout.biz Stop the top end TAPPING!!

Offline Tattoo

  • Full Member
  • Posts: 1961
  • Country: 00
Re: Rockout Rocker Inserts
« Reply #48 on: January 06, 2016, 05:24:57 PM »
I just bought a set from E-bay. thanks....

WES
"You can have anything you want
But you better not take it from me"

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #49 on: January 06, 2016, 05:27:58 PM »
Thanks, they'll be in the mail tomorrow.

 John
www.rockout.biz Stop the top end TAPPING!!

Offline Tattoo

  • Full Member
  • Posts: 1961
  • Country: 00
Re: Rockout Rocker Inserts
« Reply #50 on: January 06, 2016, 05:39:30 PM »
Thanks, they'll be in the mail tomorrow.

 John

 :up:
"You can have anything you want
But you better not take it from me"

Offline harleytuner

  • Full Member
  • Posts: 3017
  • Country: us
    • Wide Open Cycles
Re: Rockout Rocker Inserts
« Reply #51 on: January 07, 2016, 12:13:00 PM »
Just ordered 2 sets, can't wait to test them.thanks   Thanks John
Enjoying the hell out of my "hotted" up twincam

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #52 on: January 07, 2016, 01:32:02 PM »
Got the order, thanks man.... I'll have them off to you tonight.

 Please let us know how they work out for you.

 :up:
www.rockout.biz Stop the top end TAPPING!!

Offline Tattoo

  • Full Member
  • Posts: 1961
  • Country: 00
Re: Rockout Rocker Inserts
« Reply #53 on: January 09, 2016, 04:22:09 PM »
They came in the mail today and are installed,my motor is torn down for upgrades so installation was very quick. I must say I have been in this industry for 30 years and this is the first time I have seen a aftermarket product instruction sheet have a quote from a Harley-Davidson Dealer. not sure if that was a slam or just trying to get your point across. LOL....

thank you for the quick shipping and what appears to be a great product.

Wes. :up:
"You can have anything you want
But you better not take it from me"

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #54 on: January 09, 2016, 04:53:46 PM »
It's not really a slam, tho I can see how it can read that way. It was just my experience in trying to get the dealer to fix my bike. I should probably reword it.

 Looking back on it now I kinda feel sorry for the dealers. I mean there you have a guy like me, pissed off that his $30,000 bike is making this noise. You know in advance if you take it apart you're not going to find anything, you can't charge the customer for it & the MOCO isn't going to reimburse you for the time. Lose lose.

 Now they have an option to make happy customers.

 Thanks for your support, I truly appreciate it.

 John @ Rockout.
www.rockout.biz Stop the top end TAPPING!!

Offline Tattoo

  • Full Member
  • Posts: 1961
  • Country: 00
Re: Rockout Rocker Inserts
« Reply #55 on: January 09, 2016, 05:02:47 PM »
One My techs just purchased some as well and Im sure will love that part of the paperwork.   :wink:

Thanks again
"You can have anything you want
But you better not take it from me"

Offline 2006FXDCI

  • Full Member
  • Posts: 2531
  • Country: 00
  • Born to lose
Re: Rockout Rocker Inserts
« Reply #56 on: January 11, 2016, 01:35:57 PM »
Got my rockouts installed today into my SE forged supports using S&S roller rockers and shafts . The rockouts installed easily , they can be installed upside down in the SE supports so make sure the small tapered end is down . Didn't need much force to seat them , i did it by hand . It will be a while until i get my motor together and running , i will report my final findings then . The Rockouts seem like a great product ! I cant wait to hear the difference !



2006 Super glide 107" , 2005 electra glide 124"

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #57 on: January 11, 2016, 01:38:39 PM »
Thanks brother, looking forward to hearing your results.

 :up:
www.rockout.biz Stop the top end TAPPING!!

Offline Latrobedyna

  • Full Member
  • Posts: 723
  • Country: us
Re: Rockout Rocker Inserts
« Reply #58 on: February 06, 2016, 09:08:41 AM »
I never noticed any noise in my motor 2006 dyna. But i have it down for a top end rebuild and big bore upgrade. What i am wondering is would it be prudent to install these any how? I have a notion to measure the holes where the bolts fit on the rocker's and measure the bolts them selves and see how much slop there really is. As your idea seems to have merit.
2006 FXDB , 95" 57H +4% cam, 10:25 pistons: Ported head's. Lots a fun

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #59 on: February 06, 2016, 09:14:57 AM »
Well, some would say if it ain't broke don't fix it. OTOH, you're doing some pretty serious mods... $15 is pretty cheap preventative medicine :)

 User feedback on my kits has been outstanding.... one happy customer after another.

 :beer:
www.rockout.biz Stop the top end TAPPING!!

Offline Alien

  • Site Supporter
  • Full Member
  • *****
  • Posts: 393
Re: Rockout Rocker Inserts
« Reply #60 on: February 06, 2016, 11:35:41 AM »
How hard are they to remove? Say if you have to replace a rocker arm?

Offline harleytuner

  • Full Member
  • Posts: 3017
  • Country: us
    • Wide Open Cycles
Re: Rockout Rocker Inserts
« Reply #61 on: February 06, 2016, 11:40:02 AM »
How hard are they to remove? Say if you have to replace a rocker arm?

I'm guessing pretty easy. I'd probably use a broke bolt extractor.  Probably screw right out
Enjoying the hell out of my "hotted" up twincam

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #62 on: February 06, 2016, 11:43:49 AM »
How hard are they to remove? Say if you have to replace a rocker arm?

 Pretty easy, they just pop out from the bottom. You need a punch with a square edge to catch the edge of the insert. Most times they're reusable, just be careful & go slow.

 Never thought of the screw extractor, I'll have to try that some day.

www.rockout.biz Stop the top end TAPPING!!

Offline Sarhan

  • Full Member
  • Posts: 122
  • Country: bh
Re: Rockout Rocker Inserts
« Reply #63 on: February 08, 2016, 04:08:09 AM »
Any one installed the inserts on CVO 110 engine .. can you share results/feedback

Thanks
Sarhan 

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #64 on: February 09, 2016, 05:04:26 AM »
I have lots of happy users with 110's. Here's a quote from an PM I received on the "other forum" yesterday...

"after all the praise for your kit, finally broke down and bought one for my 2013 cvo roadglide. didn't know it at the time, but the 110 on that bike made a hell of a racket. I didn't think it was that bad, and so was not expecting as dramatic a difference as I got.

went through the complete installation of the kit, and have to say, it works amazing! bike is now very quiet."
www.rockout.biz Stop the top end TAPPING!!

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #65 on: February 11, 2016, 01:40:43 PM »
Clintster....

 I tried to reply to your PM but your inbox is full.


 John @ Rockout.
www.rockout.biz Stop the top end TAPPING!!

Offline Sarhan

  • Full Member
  • Posts: 122
  • Country: bh
Re: Rockout Rocker Inserts
« Reply #66 on: February 22, 2016, 11:29:00 PM »
I have lots of happy users with 110's. Here's a quote from an PM I received on the "other forum" yesterday...

"after all the praise for your kit, finally broke down and bought one for my 2013 cvo roadglide. didn't know it at the time, but the 110 on that bike made a hell of a racket. I didn't think it was that bad, and so was not expecting as dramatic a difference as I got.

went through the complete installation of the kit, and have to say, it works amazing! bike is now very quiet."


Thanks for the feedback, tried to order 2 sets from ebay and Amazon unfortunately these items can't be shipped internationally 

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #67 on: February 23, 2016, 04:37:53 AM »
I have lots of happy users with 110's. Here's a quote from an PM I received on the "other forum" yesterday...

"after all the praise for your kit, finally broke down and bought one for my 2013 cvo roadglide. didn't know it at the time, but the 110 on that bike made a hell of a racket. I didn't think it was that bad, and so was not expecting as dramatic a difference as I got.

went through the complete installation of the kit, and have to say, it works amazing! bike is now very quiet."


 

Thanks for the feedback, tried to order 2 sets from ebay and Amazon unfortunately these items can't be shipped internationally

That's strange... Bahrain is one of the countries that ebay lists in it's global shipping program, you should have no trouble there.

I can get 2 kits to you directly for $40 shipped, PM me if you'd like to order & we'll work it out.

 Thanks,

 John @ Rockout.
www.rockout.biz Stop the top end TAPPING!!

Offline Sarhan

  • Full Member
  • Posts: 122
  • Country: bh
Re: Rockout Rocker Inserts
« Reply #68 on: February 24, 2016, 12:00:31 PM »
I have lots of happy users with 110's. Here's a quote from an PM I received on the "other forum" yesterday...

"after all the praise for your kit, finally broke down and bought one for my 2013 cvo roadglide. didn't know it at the time, but the 110 on that bike made a hell of a racket. I didn't think it was that bad, and so was not expecting as dramatic a difference as I got.

went through the complete installation of the kit, and have to say, it works amazing! bike is now very quiet."




 

Thanks for the feedback, tried to order 2 sets from ebay and Amazon unfortunately these items can't be shipped internationally

That's strange... Bahrain is one of the countries that ebay lists in it's global shipping program, you should have no trouble there.

I can get 2 kits to you directly for $40 shipped, PM me if you'd like to order & we'll work it out.

 Thanks,

 John @ Rockout.

Thanks for your offer to help, I have ordered the kits and sent them to one of my friends at taxes speed he will send them along with my car parts

Thanks again

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #69 on: February 24, 2016, 01:46:00 PM »
I have lots of happy users with 110's. Here's a quote from an PM I received on the "other forum" yesterday...

"after all the praise for your kit, finally broke down and bought one for my 2013 cvo roadglide. didn't know it at the time, but the 110 on that bike made a hell of a racket. I didn't think it was that bad, and so was not expecting as dramatic a difference as I got.

went through the complete installation of the kit, and have to say, it works amazing! bike is now very quiet."




 

Thanks for the feedback, tried to order 2 sets from ebay and Amazon unfortunately these items can't be shipped internationally

That's strange... Bahrain is one of the countries that ebay lists in it's global shipping program, you should have no trouble there.

I can get 2 kits to you directly for $40 shipped, PM me if you'd like to order & we'll work it out.

 Thanks,

 John @ Rockout.

Thanks for your offer to help, I have ordered the kits and sent them to one of my friends at taxes speed he will send them along with my car parts

Thanks again

 Awesome, thank you very much for your support.

 If I can answer any questions or be of any other help, please let me know.

   :beer: :beer:
www.rockout.biz Stop the top end TAPPING!!

Offline harleytuner

  • Full Member
  • Posts: 3017
  • Country: us
    • Wide Open Cycles
Re: Rockout Rocker Inserts
« Reply #70 on: March 10, 2016, 10:57:10 AM »
Just ordered 10 more sets.

After trying 2 set and having 2 other customers put them in (4 total) these are now a standard part of all my engine kits. They are a stocking item in my shop and will be used on every build from here on out.

Thank you
Enjoying the hell out of my "hotted" up twincam

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #71 on: March 10, 2016, 11:07:50 AM »
That's great to hear! Thank you very much for your continued support. Coming from someone with your reputation & experience, your endorsement is so very welcomed!

 I'll be contacting you through PM about dealer pricing.


 Thanks again,

 John
www.rockout.biz Stop the top end TAPPING!!

Offline tommy g

  • Full Member
  • Posts: 829
  • Country: ca
Re: Rockout Rocker Inserts
« Reply #72 on: April 02, 2016, 07:23:28 PM »
Installed mine yesterday, you had included 2 extra in case doggy ran off with one. Well, no doggy but I did shoot myself in both feet because of a misaligned notch but the last insertion was succesful. One shaft certainly had a fair bit of marking and was probably the culprit, but test ride today and all is quiet as a mouse.
I appreciate the economical fix. :koolaid3:
09 FLSTC
85 FXEF

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #73 on: April 02, 2016, 07:29:06 PM »
That's great news!

 Thanks for taking the time to share your success.

 Tap free just in time for summer  :up:

 John @ Rockout
www.rockout.biz Stop the top end TAPPING!!

Offline crankme30

  • Member
  • Posts: 1
  • Country: us
Re: Rockout Rocker Inserts
« Reply #74 on: April 05, 2016, 09:07:56 AM »
Did you ever get confirmation on your testing for the EVO 1340?  I sent you an email through your website as well, but I have  1996 Heritage Softail and wouldnt mind giving this a try.

Thanks

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #75 on: April 05, 2016, 11:28:35 AM »
Hey brother,

 Thanks for your interest in my products. I replied to your email, just need some info.

 John @ Rockout
www.rockout.biz Stop the top end TAPPING!!

Offline J F Go

  • Member
  • Posts: 28
  • Country: us
Re: Rockout Rocker Inserts
« Reply #76 on: April 05, 2016, 12:59:07 PM »
Did you ever get confirmation on your testing for the EVO 1340?  I sent you an email through your website as well, but I have  1996 Heritage Softail and wouldn't mind giving this a try.Thanks

    Ordered a set for my 110 motor as well and they arrived 3 days later. That's quick, I think. I also have a 96 Heritage and would like to know if they will work in the 1340 EVO. Thanks

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #77 on: April 05, 2016, 05:14:00 PM »


    Ordered a set for my 110 motor as well and they arrived 3 days later. That's quick, I think. I also have a 96 Heritage and would like to know if they will work in the 1340 EVO. Thanks

 Thank you very much for purchasing my Rockout kit. I'll send you a PM about the Evo inserts in a few.

John @ Rockout
www.rockout.biz Stop the top end TAPPING!!

Offline J F Go

  • Member
  • Posts: 28
  • Country: us
Re: Rockout Rocker Inserts
« Reply #78 on: April 06, 2016, 06:42:42 AM »


    Ordered a set for my 110 motor as well and they arrived 3 days later. That's quick, I think. I also have a 96 Heritage and would like to know if they will work in the 1340 EVO. Thanks

 Thank you very much for purchasing my Rockout kit. I'll send you a PM about the Evo inserts in a few.
I was unable to click on your link,but Id be up for that.
John @ Rockout

Offline Tsani

  • Full Member
  • Posts: 6127
  • Country: us
  • ᏣᎳᎩ ᎤᏕᏅ
Re: Rockout Rocker Inserts
« Reply #79 on: April 06, 2016, 03:57:47 PM »
I like the fit of the bolt after installation. Takes the slop out. I am putting these in the other holes as well.
ᏣᎳᎩ ᎤᏕᏅ ᎠᏴ ᎠᎩᎸᏗ ᏔᎷᎩᏍᎩ ᎠᏂᏐᏈᎵ
ᎠᏎᏊᎢ Leonard Peltier

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #80 on: April 06, 2016, 06:09:33 PM »
I like the fit of the bolt after installation. Takes the slop out. I am putting these in the other holes as well.

 Thank you very much for purchasing my Rockout kit!

 I don't see how putting them in every hole will do anything more to stop the ticking, but it will certainly align the support plate better.

  :beer: :beer:
www.rockout.biz Stop the top end TAPPING!!

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #81 on: April 06, 2016, 06:11:00 PM »


    Ordered a set for my 110 motor as well and they arrived 3 days later. That's quick, I think. I also have a 96 Heritage and would like to know if they will work in the 1340 EVO. Thanks

 Thank you very much for purchasing my Rockout kit. I'll send you a PM about the Evo inserts in a few.
I was unable to click on your link,but Id be up for that.
John @ Rockout

 JF, please PM me your name & shipping address.

 Thanks, John @ Rockout.
www.rockout.biz Stop the top end TAPPING!!

Offline randyman

  • Full Member
  • Posts: 257
  • Country: 00
Re: Rockout Rocker Inserts
« Reply #82 on: April 07, 2016, 09:36:59 PM »
I'm expecting mine in the mail tomorrow.  They are going in the front rocker box on my 2005 Road King that I have been chasing this weird noise for a couple years on.  If this don't stop it I'm done looking and will live with noise.  One of my bolts has the c shaped mark were shaft has been tapping on it but just the top mark like an O with the bottom missing.

Offline Ohio HD

  • Professional Cat Herder
  • Administrator
  • Full Member
  • *****
  • Posts: 19507
  • Country: us
  • OH CRAP!
Re: Rockout Rocker Inserts
« Reply #83 on: April 08, 2016, 02:43:10 AM »
Do you know if these will work with Vulcan Engineering billet rocker supports for Twin Cam motors? I have a set of these supports on the way for a 124 build.


Sent from my iPhone using Tapatalk
For the best deal on bike parts, call Calif Phil
     www.harleypartscheap.com

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #84 on: April 08, 2016, 04:58:48 AM »
I'm expecting mine in the mail tomorrow.  They are going in the front rocker box on my 2005 Road King that I have been chasing this weird noise for a couple years on.  If this don't stop it I'm done looking and will live with noise.  One of my bolts has the c shaped mark were shaft has been tapping on it but just the top mark like an O with the bottom missing.

 Thanks for choosing Rockouts for your ticking problem!

 Please let us know how they work out for you.

 John
www.rockout.biz Stop the top end TAPPING!!

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #85 on: April 08, 2016, 05:00:48 AM »
Do you know if these will work with Vulcan Engineering billet rocker supports for Twin Cam motors? I have a set of these supports on the way for a 124 build.

 Sorry, I don't have any experience with those. When you get them, let me know the hole sizes & if the standard Rockouts won't fit, we'll come up with a version that will.

  :beer:

 John
www.rockout.biz Stop the top end TAPPING!!

Offline randyman

  • Full Member
  • Posts: 257
  • Country: 00
Re: Rockout Rocker Inserts
« Reply #86 on: April 09, 2016, 05:12:48 PM »
Installed them and noise still there product is very nice install was easy.  I am convinced that its just going to be noisy. Bike is a 2005 road king 95inch, SE 203 cams with upgraded tensioner conversion, short block Charlie Scotsman heads, SE adjustable push rods, S and S lifters, pro pipe, and thundermax tuner.  Bike runs very well.

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #87 on: April 09, 2016, 06:05:34 PM »
Hi Randy,

 Sorry the inserts didn't solve your ticking problem. I'm curious... did your bolts have the typical "eyebrow" marks on them?

 Thank you for trying my product, I hope you track down the source of the noise.

 John @ Rockout.
www.rockout.biz Stop the top end TAPPING!!

Offline FSG

  • BrisVegas in Oz
  • Administrator
  • Full Member
  • *****
  • Posts: 16994
  • Country: au
  • BrisVegas
Re: Rockout Rocker Inserts
« Reply #88 on: April 09, 2016, 06:11:17 PM »
Randy are there any witness marks on the PRs and have you opened up the tops of the tubes?

Offline randyman

  • Full Member
  • Posts: 257
  • Country: 00
Re: Rockout Rocker Inserts
« Reply #89 on: April 09, 2016, 06:13:08 PM »
One bolt had a mark but just top of a circle mark.  I do believe your product is a worthy product and is well priced. I would recommend it to anybody to help noise.

Offline Ohio HD

  • Professional Cat Herder
  • Administrator
  • Full Member
  • *****
  • Posts: 19507
  • Country: us
  • OH CRAP!
Re: Rockout Rocker Inserts
« Reply #90 on: April 11, 2016, 04:27:47 PM »
Do you know if these will work with Vulcan Engineering billet rocker supports for Twin Cam motors? I have a set of these supports on the way for a 124 build.

 Sorry, I don't have any experience with those. When you get them, let me know the hole sizes & if the standard Rockouts won't fit, we'll come up with a version that will.

  :beer:

 John


Here's the dimensions for the Vulcan Works rocker arm supports.


[ Guests cannot view attachments ]


[ Guests cannot view attachments ]
For the best deal on bike parts, call Calif Phil
     www.harleypartscheap.com

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #91 on: April 11, 2016, 05:22:13 PM »
Thanks for the pics. If you'll PM me your name & shipping address I'll send you a special set to try. I just ask that you keep the particulars between you & I for now, and post the results here whatever they are.



 John
www.rockout.biz Stop the top end TAPPING!!

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #92 on: April 12, 2016, 04:33:44 AM »
JW113.... Got your PM, couldn't reply... your inbox is full.

 John
www.rockout.biz Stop the top end TAPPING!!

Offline J F Go

  • Member
  • Posts: 28
  • Country: us
Re: Rockout Rocker Inserts
« Reply #93 on: May 17, 2016, 08:02:56 AM »
Finally got around to installing these in my 07 SERK and the ticking is gone. That ticking was so annoying and hearing the same old line "they all do that" was kinda tipping me over. Glad its gone. Thank you for taking the time to figure it out and the effort to correct it. :up:

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #94 on: May 17, 2016, 09:07:25 AM »
Finally got around to installing these in my 07 SERK and the ticking is gone. That ticking was so annoying and hearing the same old line "they all do that" was kinda tipping me over. Glad its gone. Thank you for taking the time to figure it out and the effort to correct it. :up:

 Hey JF,

 Thank you very much for your purchase & the feedback. I know just how you felt firing up the bike for the first time  :up: :beer:

  It really makes my day when I hear stories like yours.

 John @ Rockout
www.rockout.biz Stop the top end TAPPING!!

Offline 2006FXDCI

  • Full Member
  • Posts: 2531
  • Country: 00
  • Born to lose
Re: Rockout Rocker Inserts
« Reply #95 on: May 17, 2016, 04:08:42 PM »
Got my rockouts installed today into my SE forged supports using S&S roller rockers and shafts . The rockouts installed easily , they can be installed upside down in the SE supports so make sure the small tapered end is down . Didn't need much force to seat them , i did it by hand . It will be a while until i get my motor together and running , i will report my final findings then . The Rockouts seem like a great product ! I cant wait to hear the difference !





Got around 100 miles on my new motor . 11.5 to 1 107" using woods 999-6 cams . I am absolutely amazed at how quiet my valvetrain is ! At idle all i can hear is reversion in my throttle body . My tuner was so freaked out at how quiet my valvetrain was that he called me and asked if i adjusted my push rods correctly ! Great product and finally no more tick tick tick  :up:
2006 Super glide 107" , 2005 electra glide 124"

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #96 on: May 17, 2016, 06:27:39 PM »
Thanks brother, both for the support & taking time to get back to me with your results.

 Always great to see another addition to the tap free club!  :up: :beer:

 John @ Rockout
www.rockout.biz Stop the top end TAPPING!!

Offline TN

  • Full Member
  • Posts: 257
  • Country: 00
Re: Rockout Rocker Inserts
« Reply #97 on: June 25, 2016, 07:06:39 PM »
Just wanted to chime in here and say that Rockout inserts cured an annoying tap I had in my almost bone stock 110".  :up:  I had witness marks on two bolts.


TN

LOOK TWICE-SAVE A LIFE

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #98 on: June 25, 2016, 08:52:57 PM »
Just wanted to chime in here and say that Rockout inserts cured an annoying tap I had in my almost bone stock 110".  :up:  I had witness marks on two bolts.
TN

 Thanks man, that's great to hear. Have a great weekend, & thanks again for your support  :beer: :beer:

John
www.rockout.biz Stop the top end TAPPING!!

Offline TN

  • Full Member
  • Posts: 257
  • Country: 00
Re: Rockout Rocker Inserts
« Reply #99 on: June 26, 2016, 07:06:02 AM »
I wasn't sure about the right vendor I used but I am now.  :up:  My kit had five inserts and purchased thru amazon prime. I turned my local indy on to them and he purchased fifteen sets to start off with.

Again, such a simple solution for a specific tap tap.

Rock On


TN
LOOK TWICE-SAVE A LIFE

Offline Ohio HD

  • Professional Cat Herder
  • Administrator
  • Full Member
  • *****
  • Posts: 19507
  • Country: us
  • OH CRAP!
Re: Rockout Rocker Inserts
« Reply #100 on: June 27, 2016, 08:30:31 AM »
I wasn't sure about the right vendor I used but I am now.  :up:  My kit had five inserts and purchased thru amazon prime. I turned my local indy on to them and he purchased fifteen sets to start off with.

Again, such a simple solution for a specific tap tap.

Rock On


TN

Agree    :up:
For the best deal on bike parts, call Calif Phil
     www.harleypartscheap.com

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #101 on: June 27, 2016, 09:03:27 AM »
I wasn't sure about the right vendor I used but I am now.  :up:  My kit had five inserts and purchased thru amazon prime. I turned my local indy on to them and he purchased fifteen sets to start off with.

Again, such a simple solution for a specific tap tap.

Rock On


TN

Agree    :up:

 Thanks guys, your support is very much appreciated  :beer:
www.rockout.biz Stop the top end TAPPING!!

Offline Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4238
  • Country: us
Re: Rockout Rocker Inserts
« Reply #102 on: August 10, 2016, 10:17:40 AM »
Hi John, you have a PM.

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #103 on: August 10, 2016, 01:36:31 PM »
Hi John, you have a PM.

 Got it, Rockout kits on the way.

 Thank you very much for your orders.

  John
www.rockout.biz Stop the top end TAPPING!!

Offline Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4238
  • Country: us
Re: Rockout Rocker Inserts
« Reply #104 on: August 10, 2016, 02:08:12 PM »
Hi John, you have a PM.

 Got it, Rockout kits on the way.

 Thank you very much for your orders.

  John
Thank you John.

Offline hbkeith

  • Full Member
  • Posts: 2789
Re: Rockout Rocker Inserts
« Reply #105 on: October 02, 2016, 03:34:03 PM »
Not much talk on these for BT EVO

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #106 on: October 02, 2016, 03:42:10 PM »
Not much talk on these for BT EVO

 I have Rockouts specifically for EVO big twins, just not listed for sale yet. PM me if you're interested & I'll get a set to you.

 Thanks,

 John @ Rockout
www.rockout.biz Stop the top end TAPPING!!

Offline Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4238
  • Country: us
Re: Rockout Rocker Inserts
« Reply #107 on: October 02, 2016, 04:23:32 PM »
Hey john, I have been using these in all of the builds I have been doing and will be including them in stage 2 packages as well.

Glad you found a simple solution :up:

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #108 on: October 02, 2016, 04:30:43 PM »
Hey john, I have been using these in all of the builds I have been doing and will be including them in stage 2 packages as well.

Glad you found a simple solution :up:

 Thanks brother, I'm very happy to hear Rockouts are working so well for you.  :up:

 John @ Rockout
www.rockout.biz Stop the top end TAPPING!!

Offline westcomb

  • Full Member
  • Posts: 276
  • Country: us
Re: Rockout Rocker Inserts
« Reply #109 on: October 03, 2016, 05:17:49 AM »
First I have seen anything about this ........ I will be sure to try them out next time I'm into a twin cam!  :up:

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #110 on: October 03, 2016, 05:28:44 PM »
First I have seen anything about this ........ I will be sure to try them out next time I'm into a twin cam!  :up:

 It's what all the cool kids are doing :)
www.rockout.biz Stop the top end TAPPING!!

Offline RK031

  • Member
  • Posts: 47
  • Country: us
Re: Rockout Rocker Inserts
« Reply #111 on: October 04, 2016, 06:02:28 PM »
Great product, quick shipping, easy install, and they work. Installed mine last weekend and very pleased with results. Word of mouth is best advertising out there. Thanks!!!!!!!!!!
Growing old is mandatory. Growing UP is optional.

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #112 on: October 04, 2016, 06:05:36 PM »
Great product, quick shipping, easy install, and they work. Installed mine last weekend and very pleased with results. Word of mouth is best advertising out there. Thanks!!!!!!!!!!

 Thanks man, I really appreciate your taking the time to post your results.

 Keep telling people :)

 John @ Rockout
www.rockout.biz Stop the top end TAPPING!!

Offline Sarhan

  • Full Member
  • Posts: 122
  • Country: bh
Re: Rockout Rocker Inserts
« Reply #113 on: October 04, 2016, 11:04:37 PM »
Just installed them on my 117 build not yet tested but I believe they will do the job as have seen remarks and scratching on all rocker bolts also it was very easy to rotate the shaft ... highly recommended     

Offline Frédéric CM

  • Full Member
  • Posts: 326
  • Country: fr
Re: Rockout Rocker Inserts
« Reply #114 on: December 06, 2016, 11:47:48 AM »
(link deleted... John)

I just found that online; same installation method as you :) They seems to be longer so i wonder if that make any difference ?
« Last Edit: December 06, 2016, 06:30:39 PM by Rockout Rocker Products »

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #115 on: December 06, 2016, 12:02:39 PM »
That is a blatant copy of my patent pending product.
www.rockout.biz Stop the top end TAPPING!!

Offline Frédéric CM

  • Full Member
  • Posts: 326
  • Country: fr
Re: Rockout Rocker Inserts
« Reply #116 on: December 06, 2016, 12:40:27 PM »
That was my first thought, that's why I posted it ;)

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #117 on: December 06, 2016, 01:35:58 PM »
Thanks man, much appreciated. That "inventor" has been notified, we will see.

=update=


 The other party responded promptly, the matter has been resolved.

 Thanks again  :up:
« Last Edit: December 06, 2016, 05:52:54 PM by Rockout Rocker Products »
www.rockout.biz Stop the top end TAPPING!!

Offline Frédéric CM

  • Full Member
  • Posts: 326
  • Country: fr
Re: Rockout Rocker Inserts
« Reply #118 on: December 28, 2016, 02:52:45 AM »
Do you have an EVO version ?

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 2248
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockout Rocker Inserts
« Reply #119 on: December 28, 2016, 04:31:45 AM »
Do you have an EVO version ?

 Certainly. Same price/kit... slightly different inserts.

 Just PM me to place an order.

 John @ Rockout
www.rockout.biz Stop the top end TAPPING!!

Offline Frédéric CM

  • Full Member
  • Posts: 326
  • Country: fr
Re: Rockout Rocker Inserts
« Reply #120 on: December 29, 2016, 11:48:22 AM »
Thanks I'll let my Buddy know, and may order some soon ;) I asked because not it's listed on your site...