Author Topic: late cv 40 off of twin cam  (Read 381 times)

0 Members and 1 Guest are viewing this topic.

Offline johnchev89

  • Member
  • Posts: 18
  • Country: us
late cv 40 off of twin cam
« on: January 29, 2017, 06:44:08 AM »
will a cv 40 off of a late twin cam work on an 883 sporty with a jet change?

Offline tmwmoose

  • Site Supporter
  • Full Member
  • *****
  • Posts: 2501
  • Country: 00
Re: late cv 40 off of twin cam
« Reply #1 on: January 29, 2017, 06:53:03 AM »
Sure  but you will have to switch  the cable brackets

Offline johnchev89

  • Member
  • Posts: 18
  • Country: us
Re: late cv 40 off of twin cam
« Reply #2 on: January 29, 2017, 07:01:41 AM »
cool deal.  have all the parts just that the float bowl stands are broke and the main jet tube is broke off in the carb.

Online Hossamania

  • Site Supporter
  • Full Member
  • *****
  • Posts: 12696
  • Country: us
Re: late cv 40 off of twin cam
« Reply #3 on: January 31, 2017, 11:28:24 AM »
cool deal.  have all the parts just that the float bowl stands are broke and the main jet tube is broke off in the carb.


What have you been doing to that poor thing?
Happiness does not buy money.

Offline koko3052

  • Full Member
  • Posts: 4631
  • Country: ca
Re: late cv 40 off of twin cam
« Reply #4 on: February 01, 2017, 12:16:41 PM »
Fine tuning from a lean condition.....with a hammer! :emsad:

Offline johnchev89

  • Member
  • Posts: 18
  • Country: us
Re: late cv 40 off of twin cam
« Reply #5 on: February 01, 2017, 03:17:56 PM »
just trying to catch up on some badly neglected maintenance.  bone stock 883 with a Barnett scorpion clutch.  overkill??
have got it all squared away now.  new emulsion tube and replaced all the seals .
she runs good enuff for the girlfriend to get her feet wet.
had to put a muller power clutch in it for her too.  that Barnett clutch is tough.
« Last Edit: February 01, 2017, 03:20:22 PM by johnchev89 »