Author Topic: 2009, 110", FLTRSE, Cycle-Rama 595 cams.  (Read 3380 times)

0 Members and 1 Guest are viewing this topic.

Online Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4226
  • Country: us
2009, 110", FLTRSE, Cycle-Rama 595 cams.
« on: November 06, 2017, 03:45:55 PM »
I didn't build this, just swapped cams and tuned it.

Reverse engineering from the just under 200 ccp puts it in the 10.7:1 static range, also these heads have huge intake ports and I feel with a purpose built set of heads and known dimensions of the chambers and dome volume the left side would have been even better.
[ Guests cannot view attachments ]

Offline 1FSTRK

  • Full Member
  • Posts: 7863
  • Country: 00
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #1 on: November 06, 2017, 03:58:02 PM »
 :up: :up: on the tune.
What head castings, stock or SE 110
How was the clutch down low?
The cam looks to have plenty of upperend.
Thanks for posting.
"Never hang on to a mistake just because you spent time or money making it."

Offline lucasg

  • Full Member
  • Posts: 316
  • Country: ca
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #2 on: November 06, 2017, 03:58:35 PM »
Great job Darren  :up: :up:  I'm sure it'll put a smile on the owners face. :bike:

Offline No Cents

  • Full Member
  • Posts: 8066
  • Country: us
  • there is no cure for what I got !
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #3 on: November 06, 2017, 04:03:13 PM »
 nice results!  :up:
08 FLHX my grocery getter, 124ci, wfolarry 110" heads, Burns pipe, 158/152 sae

Offline Yo_Boss

  • Full Member
  • Posts: 78
  • Country: us
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #4 on: November 06, 2017, 04:25:51 PM »
A little bit soft down low but huge HP for a 110!

Online 98fxstc

  • Site Supporter
  • Full Member
  • *****
  • Posts: 1153
  • Country: au
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #5 on: November 06, 2017, 04:44:54 PM »
another good tune Daren
 :up:
you certainly have a handle on it
that 595 appears to have some potential

Online Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4226
  • Country: us
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #6 on: November 06, 2017, 04:45:46 PM »
:up: :up: on the tune.
What head castings, stock or SE 110
How was the clutch down low?
The cam looks to have plenty of upperend.
Thanks for posting.
Clutch was good. SE 110 heads.
A little bit soft down low but huge HP for a 110!
The left side of the graph would have been better with the right heads. These are known for huge intake ports.

Offline 1FSTRK

  • Full Member
  • Posts: 7863
  • Country: 00
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #7 on: November 06, 2017, 04:52:10 PM »
Thanks
Do you know what static compression range Wes recommends for this cam?
"Never hang on to a mistake just because you spent time or money making it."

Online Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4226
  • Country: us
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #8 on: November 06, 2017, 05:09:20 PM »
Thanks
Do you know what static compression range Wes recommends for this cam?
10.6-11:1

Offline 1FSTRK

  • Full Member
  • Posts: 7863
  • Country: 00
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #9 on: November 06, 2017, 05:10:54 PM »
Thanks
Do you know what static compression range Wes recommends for this cam?
10.6-11:1

 :up: :up:
"Never hang on to a mistake just because you spent time or money making it."

Offline GunShyKennedy

  • Full Member
  • Posts: 250
  • Country: au
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #10 on: November 06, 2017, 05:42:01 PM »
another good tune Daren
 :up:
you certainly have a handle on it
that 595 appears to have some potential

You think?  :wink:
That's a ripper result.
cheers,
richo

Offline Tail Ridr

  • Full Member
  • Posts: 66
  • Country: us
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #11 on: November 07, 2017, 02:07:52 AM »
Would love to see the results of a "designed" build, maybe bringing up the left some...good results for a "pot luck" build. What cam did it replace?
Eliminate the Imperfections of mass production!

Online Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4226
  • Country: us
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #12 on: November 07, 2017, 03:36:16 AM »
Would love to see the results of a "designed" build, maybe bringing up the left some...good results for a "pot luck" build. What cam did it replace?
S&S 585

Offline Mirrmu

  • Full Member
  • Posts: 219
  • Country: au
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #13 on: November 08, 2017, 12:15:20 AM »
Could you post Dyno run with s&s585?

Offline CVOThunder

  • Full Member
  • Posts: 156
  • Country: us
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #14 on: November 08, 2017, 01:55:59 AM »
Wow, pretty cool numbers and great job. Bet it's a blast to ride. When I see numbers like that I immediately think about flywheels being stock or reworked. I guess as long as a person doesn't just beat the heck out of it then maybe the stocker would hold up. 
2015 FLTRXS Denim, 2011.5 CVO Ultra, 2007 Softail Custom FXSTC

Online Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4226
  • Country: us
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #15 on: November 09, 2017, 09:29:40 PM »
another good tune Daren
 :up:
you certainly have a handle on it
that 595 appears to have some potential
Thanks 98. Potent is the word I would use.

This customer was gracious enough to volunteer to be the first recipient under the pretense that if they didn't perform I would install a different cam set and re-tune.

Mirrmu, the tune was really in a mess and this bike had Dresser duals and Hi Output mufflers on it when dropped off so it's really not a fair comparison to the proven 585.

Onward and upward, looking forward to more builds with this cam.

Wes has created another winner!


Offline Mirrmu

  • Full Member
  • Posts: 219
  • Country: au
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #16 on: November 10, 2017, 12:32:02 PM »
Well that's a bit disappointing


Offline HD Street Performance

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 8740
  • Country: 00
    • HD Street Performance
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #17 on: November 12, 2017, 05:26:27 PM »
Is this cam available in gear drive for a 2010?

Online Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4226
  • Country: us
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #18 on: November 13, 2017, 01:57:08 AM »
Is this cam available in gear drive for a 2010?
None are available at the moment, but when they are in 8 weeks or so I am sure that Wes will have them in gear drive for 2007 up.

Online Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4226
  • Country: us
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #19 on: November 17, 2017, 03:40:53 PM »
Is this cam available in gear drive for a 2010?
Wes said special order only on gear drive CR-595's but that he can get them a lot quicker than the chain drive's because they have the blanks in stock, 2-2.5 weeks.

Offline Geraldsd

  • Site Supporter
  • Member
  • *****
  • Posts: 45
  • Country: us
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #20 on: November 28, 2017, 08:12:45 PM »
 :up: :up:
2014 FLHX, S&S 110" kit, CR-575 Cams, HDSP Heads
10.5/1, D&D Fat Cat, Stock TB

Offline sfmichael

  • Site Supporter
  • Full Member
  • *****
  • Posts: 5556
  • Country: us
  • Hoping to build the next mighty 'mouse'
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #21 on: November 29, 2017, 08:42:09 PM »
very stout - that cam looks impressive  :up: :up:

and I'm sure the tune makes it look its best  :up: :up: :up:
Colorado Springs, CO.

Offline Stingray

  • Member
  • Posts: 1
  • Country: us
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #22 on: November 30, 2017, 02:05:44 PM »
Does this cam require roller rockers?

Online Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4226
  • Country: us
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #23 on: November 30, 2017, 07:27:32 PM »
Does this cam require roller rockers?
Stock rockers are fine.

Offline fat103

  • Member
  • Posts: 27
  • Country: au
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #24 on: December 04, 2017, 06:04:40 PM »
Who's cnc heads are used on this build  Durwood ? Nice job 👍

Online Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4226
  • Country: us
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #25 on: December 04, 2017, 06:25:57 PM »
Who's cnc heads are used on this build  Durwood ? Nice job 👍
Kendall Johnson...Thanks.

Offline fat103

  • Member
  • Posts: 27
  • Country: au
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #26 on: December 05, 2017, 04:24:14 PM »
Thanks Durwood. The CR 595 is becoming a popular cam.👍

Offline Yo_Boss

  • Full Member
  • Posts: 78
  • Country: us
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #27 on: April 10, 2018, 06:29:21 PM »
I want one these CR 595 cams!

Offline Prostock

  • Site Supporter
  • Full Member
  • *****
  • Posts: 298
  • Country: us
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #28 on: May 15, 2018, 04:32:35 PM »
Currently building a 11.0-1, 107" in a 16 Road Glide.  Talked with Darren and Wes, "Good people BTW" and decided to go with these cams.  Build will be from the wheels up.  Should be tuning it by the end of next week.  Will post results.

Scot

Offline 1workinman

  • Site Supporter
  • Full Member
  • *****
  • Posts: 1006
  • Country: us
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #29 on: May 15, 2018, 04:48:20 PM »
Looks good to me , sure does not lay over . the way I like one to run.  Just keep pulling up to the rev limiter 

Offline sfmichael

  • Site Supporter
  • Full Member
  • *****
  • Posts: 5556
  • Country: us
  • Hoping to build the next mighty 'mouse'
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #30 on: May 16, 2018, 08:58:39 AM »
Currently building a 11.0-1, 107" in a 16 Road Glide.  Talked with Darren and Wes, "Good people BTW" and decided to go with these cams.  Build will be from the wheels up.  Should be tuning it by the end of next week.  Will post results.

Scot

looking forward to it - should be a runner  :pop:
Colorado Springs, CO.

Offline HighLiner

  • Site Supporter
  • Full Member
  • *****
  • Posts: 1200
  • Country: us
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #31 on: May 16, 2018, 04:57:26 PM »
Are these cams quiet?  Any sound clips?

Online Durwood

  • Site Supporter
  • Full Member
  • *****
  • Posts: 4226
  • Country: us
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #32 on: May 17, 2018, 04:02:01 AM »
Are these cams quiet?  Any sound clips?
They are very quiet in the valve train department.

I have a fresh 103 build in the shop for a tune, I will take a video clip of it.

Offline HighLiner

  • Site Supporter
  • Full Member
  • *****
  • Posts: 1200
  • Country: us
Re: 2009, 110", FLTRSE, Cycle-Rama 595 cams.
« Reply #33 on: May 17, 2018, 05:39:04 AM »
Iíll be waiting patiently  :pop: