Author Topic: 2016, 124", FLHXSE, 266e cams HPI 62/64 fbw  (Read 624 times)

0 Members and 1 Guest are viewing this topic.

Offline dsvracer

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 253
  • Country: 00
    • dan vance racing
2016, 124", FLHXSE, 266e cams HPI 62/64 fbw
« on: November 30, 2017, 06:03:15 AM »
customer asked me to post for him.   dsv

[ Guests cannot view attachments ]
« Last Edit: November 30, 2017, 08:03:32 AM by Coyote »
FAST NOT FICTION
www.danvanceracing.com

Offline Ohio HD

  • Professional Cat Herder
  • Administrator
  • Full Member
  • *****
  • Posts: 18278
  • Country: us
  • OH CRAP!
Re: 2016, 124", FLHXSE, 266e cams HPI 62/64 fbw
« Reply #1 on: November 30, 2017, 08:48:04 AM »
Really good top end there. Do you know what exhaust he used Dan?

For the best deal on bike parts, call Calif Phil
     www.harleypartscheap.com

Offline kd

  • Site Supporter
  • Full Member
  • *****
  • Posts: 5390
  • Country: ca
Re: 2016, 124", FLHXSE, 266e cams HPI 62/64 fbw
« Reply #2 on: November 30, 2017, 09:00:08 AM »
Really good top end there. Do you know what exhaust he used Dan?




The chart says Bosszilla Brian.  Good use of the 266E (120R cam) here for top end power.  :up:  It produced better here than the 120R usually does using it. There must be some good magic in the heads and the HPI 62/64 TB is carrying the weight well up top too.
KD

Offline dsvracer

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 253
  • Country: 00
    • dan vance racing
Re: 2016, 124", FLHXSE, 266e cams HPI 62/64 fbw
« Reply #3 on: December 01, 2017, 05:49:30 AM »
i flowed the heads using the 58/62 hpi w/1.700 runners and then flowed the 62/64 w/1.800 runners and it wasn't that much better, just a few cfm here and there. nothing to get all excited about. it seems like it is just a good combinations of parts, good head work and a good tune to top it off.
FAST NOT FICTION
www.danvanceracing.com

Offline 1workinman

  • Site Supporter
  • Full Member
  • *****
  • Posts: 920
  • Country: us
Re: 2016, 124", FLHXSE, 266e cams HPI 62/64 fbw
« Reply #4 on: December 01, 2017, 03:33:56 PM »
  I like the way it just keeps making hp good job

Offline kd

  • Site Supporter
  • Full Member
  • *****
  • Posts: 5390
  • Country: ca
Re: 2016, 124", FLHXSE, 266e cams HPI 62/64 fbw
« Reply #5 on: December 02, 2017, 06:20:53 AM »
i flowed the heads using the 58/62 hpi w/1.700 runners and then flowed the 62/64 w/1.800 runners and it wasn't that much better, just a few cfm here and there. nothing to get all excited about. it seems like it is just a good combinations of parts, good head work and a good tune to top it off.


That's good information Dan. It tells me that (in this case any way) for the same money the 62/64 will give a little more and is worth considering. I went with the 62.64 on my 120 and now I feel it was probably a good decision.  :up:
KD

Offline CVOKing

  • Member
  • Posts: 44
  • Country: us
Re: 2016, 124", FLHXSE, 266e cams HPI 62/64 fbw
« Reply #6 on: December 02, 2017, 08:09:39 AM »
I have always felt this cam has potential. In 120r form 10.5 cr makes it look bad

Offline HD Street Performance

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 8623
  • Country: 00
    • HD Street Performance
Re: 2016, 124", FLHXSE, 266e cams HPI 62/64 fbw
« Reply #7 on: December 02, 2017, 09:24:31 AM »
Always liked the cam when it has the right compression at 120+ cu in
What size and which injectors were used?

Offline Ohio HD

  • Professional Cat Herder
  • Administrator
  • Full Member
  • *****
  • Posts: 18278
  • Country: us
  • OH CRAP!
Re: 2016, 124", FLHXSE, 266e cams HPI 62/64 fbw
« Reply #8 on: December 02, 2017, 09:39:51 AM »
Jim Kennedy has tried a few cams in his super charged 120r 103, one was a custom grind, he went back to the SE 266, said it pulls better at the top, which is what he's concerned with at the track.
« Last Edit: December 02, 2017, 05:47:11 PM by Ohio HD »
For the best deal on bike parts, call Calif Phil
     www.harleypartscheap.com

Offline sfmichael

  • Site Supporter
  • Full Member
  • *****
  • Posts: 5322
  • Country: us
  • Hoping to build the next mighty 'mouse'
Re: 2016, 124", FLHXSE, 266e cams HPI 62/64 fbw
« Reply #9 on: December 03, 2017, 03:34:49 PM »
that cam does work well - needs some squeeze tho
Colorado Springs, CO.