Author Topic: Primary flat bar  (Read 450 times)

0 Members and 1 Guest are viewing this topic.

Offline scootertrash1

  • Site Supporter
  • Member
  • *****
  • Posts: 13
  • Country: us
  • Saddle Up
Primary flat bar
« on: January 13, 2018, 11:37:38 AM »
Anyone have the particulars of flat bar locking tool for EVO Dyna primary? I don't have any of that left anymore for EVO. Will my TC bar work by not being too long or something?

Offline thumper 823

  • Full Member
  • Posts: 552
  • Country: us
  • If they say cant , it just means someone else will
Re: Primary flat bar
« Reply #1 on: January 13, 2018, 09:28:27 PM »
Most NAPA stores will carry some steel.
Ace does too.
D Troop 3/5, - C/16 ,162AHC, Mekong delta.
Amateur engineering with bad math.

Offline FSG

  • BrisVegas in Oz
  • Administrator
  • Full Member
  • *****
  • Posts: 16804
  • Country: au
  • BrisVegas
Re: Primary flat bar
« Reply #2 on: January 14, 2018, 01:32:34 AM »
got an old lawn mower blade in the shed?

Online 1FSTRK

  • Full Member
  • Posts: 7642
  • Country: 00
Re: Primary flat bar
« Reply #3 on: January 14, 2018, 04:35:45 AM »
Anyone have the particulars of flat bar locking tool for EVO Dyna primary? I don't have any of that left anymore for EVO. Will my TC bar work by not being too long or something?

It depends on the year and model.
If you have a late 90's EVO Dyna and the Twin cam lock bar is for a pre-06 Dyna then the answer should be Yes
"Never hang on to a mistake just because you spent time or money making it."

Offline misfitJason

  • Site Supporter
  • Full Member
  • *****
  • Posts: 680
  • Country: us
Re: Primary flat bar
« Reply #4 on: January 14, 2018, 05:08:35 AM »
If you want to make one....go to Heartland tools and it has the specific legnths.  If I remember correctly my evo bar did not fit in my twincam dyna and I had to get a different one
2006 Dyna, Kraftech Evo Softail

Offline scootertrash1

  • Site Supporter
  • Member
  • *****
  • Posts: 13
  • Country: us
  • Saddle Up
Re: Primary flat bar
« Reply #5 on: January 14, 2018, 02:24:34 PM »
I was wondering if anyone had any lengths to cut one out. I got a chunk of steel to9 make one. I am going from Florida to Illinois to visit and going to help a bro there while on the visit. Just wanted my ducks in a row! Thanks!

Online 1FSTRK

  • Full Member
  • Posts: 7642
  • Country: 00
Re: Primary flat bar
« Reply #6 on: January 14, 2018, 03:33:18 PM »
Both Dyna and Softail models from 1990-2006 should use the 8.5" locking bar.
"Never hang on to a mistake just because you spent time or money making it."

Offline scootertrash1

  • Site Supporter
  • Member
  • *****
  • Posts: 13
  • Country: us
  • Saddle Up
Re: Primary flat bar
« Reply #7 on: January 25, 2018, 05:27:09 PM »
Awesome! Thanks!

Offline PIRSCH FIRE WAGON

  • Site Supporter
  • Full Member
  • *****
  • Posts: 666
  • Country: us
Re: Primary flat bar
« Reply #8 on: January 25, 2018, 06:51:58 PM »
The EVO and Shovel only require the Stepped Wedge which you can pick up for about $12 now on-line.

The TC and Buell used them because of the added Torque to the components.

I'll measure mine and post a photo with the measurements. You can make all four for about $10 with a piece of Stock as described above. BTW: Chamfer the working edges to prevent damage to the Sprockets.
« Last Edit: January 25, 2018, 07:06:53 PM by PIRSCH FIRE WAGON »
Tom