Author Topic: Ultima Head Gast  (Read 336 times)

0 Members and 1 Guest are viewing this topic.

Offline Deye76

  • Full Member
  • Posts: 7977
  • Country: 00
Ultima Head Gast
« on: January 27, 2018, 11:48:55 AM »
Anyone know the thickness of a Ultima HG? 113" cu. in.
East Tenn.
2014 CVO RK, 2015 RGS, 1992 FXRP

Offline jsachs1

  • Full Member
  • Posts: 1311
  • Country: 00
Re: Ultima Head Gast
« Reply #1 on: January 27, 2018, 05:46:43 PM »
Anyone know the thickness of a Ultima HG? 113" cu. in.
They have 2.
.035" and .055"
John

Offline Deye76

  • Full Member
  • Posts: 7977
  • Country: 00
Re: Ultima Head Gast
« Reply #2 on: January 28, 2018, 08:26:37 AM »
Thanks John, knew you would know. How would I find out what came in the motor that was recently purchased. Guess a compression check will give a clue.
East Tenn.
2014 CVO RK, 2015 RGS, 1992 FXRP

Offline jsachs1

  • Full Member
  • Posts: 1311
  • Country: 00
Re: Ultima Head Gast
« Reply #3 on: January 28, 2018, 02:54:46 PM »
Thanks John, knew you would know. How would I find out what came in the motor that was recently purchased. Guess a compression check will give a clue.
Call the manufacturer with the serial #, when you bought it, and they should be able to tell you.
John

Offline Deye76

  • Full Member
  • Posts: 7977
  • Country: 00
Re: Ultima Head Gast
« Reply #4 on: January 28, 2018, 04:10:46 PM »
Thank you.
East Tenn.
2014 CVO RK, 2015 RGS, 1992 FXRP

Offline JW113

  • Full Member
  • Posts: 1371
  • Country: 00
  • San Jose, California
Re: Ultima Head Gast
« Reply #5 on: January 29, 2018, 12:18:20 PM »
If they are the Multi Layer Steel gaskets, should be a couple ears sticking out that you could measure with a mic?

-JW
2004 FLHRS   1977 FLH Shovelhead  1992 FLSTC
1945 Indian Chief   1978 XL Bobber

Offline Deye76

  • Full Member
  • Posts: 7977
  • Country: 00
Re: Ultima Head Gast
« Reply #6 on: January 29, 2018, 12:30:41 PM »
Thanks JW.
Midwest informed me .035".
East Tenn.
2014 CVO RK, 2015 RGS, 1992 FXRP