Author Topic: Can anybody ID this exhaust?  (Read 1717 times)

0 Members and 1 Guest are viewing this topic.

Offline OldMike

  • Member
  • Posts: 14
  • Country: us
Can anybody ID this exhaust?
« on: February 10, 2013, 04:49:59 PM »
I don't like a real deep rumble, this exhaust note doesn't sound too bad, ever see these mufflers?
Night Rod Special! Fighter rod...

Online rbabos

  • Full Member
  • Posts: 13302
  • Country: ca
Re: Can anybody ID this exhaust?
« Reply #1 on: February 10, 2013, 06:21:24 PM »
Look like a slashed down Tab or a home brew version of it. Most likely unbaffled to boot. It will be ear splitting at cruise. Revolution engines can get nasty loud after 4k.
Ron

Offline Rusty Steel

  • Full Member
  • Posts: 1314
  • Country: 00
Re: Can anybody ID this exhaust?
« Reply #2 on: February 10, 2013, 09:38:28 PM »
Mike, I got to say that I love the V-Rodís and hope to own one someday. That is a great looking rod; with that said, I donít like the sound of this pipe for some reason unknown.  :nix:
If it ain't broke... Fix it until it is.

Offline OldMike

  • Member
  • Posts: 14
  • Country: us
Re: Can anybody ID this exhaust?
« Reply #3 on: February 11, 2013, 03:25:28 AM »
Look like a slashed down Tab or a home brew version of it. Most likely unbaffled to boot. It will be ear splitting at cruise. Revolution engines can get nasty loud after 4k.
Ron
OK, I'll stick with the Supertrapp idea for now.

Online rbabos

  • Full Member
  • Posts: 13302
  • Country: ca
Re: Can anybody ID this exhaust?
« Reply #4 on: February 11, 2013, 09:32:36 AM »
Look like a slashed down Tab or a home brew version of it. Most likely unbaffled to boot. It will be ear splitting at cruise. Revolution engines can get nasty loud after 4k.
Ron
OK, I'll stick with the Supertrapp idea for now.
That wasn't my first choice. After test riding one with the v/h competition pipe, I liked the idea of shedding a lot of weight and cleaning up the back end. Problem is each manufacuter admitted the 2-1 was loud so decided the go with the STs in the end. I couldn't stand the v/h competition for too long. It's a leg burner too.
Ron

Offline q1svt

  • Full Member
  • Posts: 2177
  • Country: 00
Re: Can anybody ID this exhaust?
« Reply #5 on: March 27, 2013, 03:29:09 PM »
rbabos is on the money as usual...

youtube poster...  states "Self made slipons"

Published on Apr 19, 2012
Little footage off my ride. Just heading for a ride!!!

Mods:
Remowed the catalysator, self made slipons, intake mod! Answers the throttle so much better!!!
260 rear
Self made Fighter style rearsection and seat
Rear led light,and the bracket for the light
Front fender
Side licence plate holder.
Painted the rear shocks and rear pulley black.
Coming Wilbers 640 series rear shocks ,custom made just for this bike!!!
Plack powder on the brake/clutch levers and shifter/foot pedals
Cut and shaped the levers,for more sporty look. Powder black
Modded the belt shield
Self made slipons,dynojet,remowed cat. Mapped on dyno= 124hp rear tyre
Lowered the headlight section,and reloceated the speedometer behind the handlebar.
Chanced the risers and painted the bar.
Barend front and mini indicators rear
Mirrors
Ram air sidecovers
Self made horn and coolinghose covers and more....

Here the link for the bike mod:
http://www.1130cc.com/forums/showthre...
Greatest obstacle to discovery is not ignorance, it's the illusion of knowledge.

Offline kristian

  • Full Member
  • Posts: 1080
  • Country: ca
Re: Can anybody ID this exhaust?
« Reply #6 on: August 05, 2013, 06:51:23 PM »
look like force v mufflers(un baffled)... :scratch:
Kris