Author Topic: 124" DIY sale  (Read 3266 times)

0 Members and 1 Guest are viewing this topic.

Offline prodrag1320

  • Moderator
  • Full Member
  • *****
  • Posts: 4985
  • Country: 00
  • AHDRA & AMRA national champion & record holder
    • vee twin racing
124" DIY sale
« on: May 19, 2015, 12:48:21 PM »
more for the do it yourself builder,just add your choice of heads & cams (we can also supply that too):
bore your cases
install Timken comversion
install S&S 4.625" F/W`s
include S&S 4.125" cylinder kit
$3195.00
« Last Edit: August 12, 2017, 05:12:28 AM by prodrag1320 »

Offline CVOThunder

  • Full Member
  • Posts: 154
  • Country: us
Re: 124" DIY sale
« Reply #1 on: September 21, 2015, 03:10:28 PM »
Cool beans, something to consider when the time is right. At least next summer when I return to the US. Hope I do anyway.
2015 FLTRXS Denim, 2011.5 CVO Ultra, 2007 Softail Custom FXSTC

Offline prodrag1320

  • Moderator
  • Full Member
  • *****
  • Posts: 4985
  • Country: 00
  • AHDRA & AMRA national champion & record holder
    • vee twin racing
Re: 124" DIY sale
« Reply #2 on: December 24, 2015, 03:46:04 PM »
Get on this before the sale is over!!!

Offline jerseyhardtail

  • Full Member
  • Posts: 125
  • Country: us
Re: shop open?
« Reply #3 on: February 02, 2016, 08:42:20 AM »
your shop going to be open sat, bike week deland block party
No longer in NJ retired on the Mountain in PA

Offline prodrag1320

  • Moderator
  • Full Member
  • *****
  • Posts: 4985
  • Country: 00
  • AHDRA & AMRA national champion & record holder
    • vee twin racing
Re: 124" DIY sale
« Reply #4 on: February 06, 2016, 02:07:20 PM »
Not really sure,i know ill be in the friday before deland bike day

Offline jerseyhardtail

  • Full Member
  • Posts: 125
  • Country: us
Re: 124" DIY sale
« Reply #5 on: February 16, 2016, 02:24:05 PM »
Ok I'm coming down not sure how long. I'll try and stop by thanks
No longer in NJ retired on the Mountain in PA

Offline prodrag1320

  • Moderator
  • Full Member
  • *****
  • Posts: 4985
  • Country: 00
  • AHDRA & AMRA national champion & record holder
    • vee twin racing
Re: 124" DIY sale
« Reply #6 on: February 21, 2016, 02:24:25 PM »
OK

Offline masstch

  • Full Member
  • Posts: 851
  • Country: us
Re: 124" DIY sale
« Reply #7 on: February 21, 2016, 08:25:39 PM »
1. What CR is available from their piston choices with 95cc heads?

2. With the 110 case, are the o-ring grooves cut fully out or welded/cut?
3. If using an '01 88" case is there a discount (Timken already)?
4. Is there any reason NOT to use an '01 88" case?
Rhetorical questions, who still does those?

Offline prodrag1320

  • Moderator
  • Full Member
  • *****
  • Posts: 4985
  • Country: 00
  • AHDRA & AMRA national champion & record holder
    • vee twin racing
Re: 124" DIY sale
« Reply #8 on: February 27, 2016, 04:28:53 AM »
we have CP pistons with +15 cc domes,so pretty much any compression can be achieved with machining the domes
with 110 heads all the O ring groove isn't machined off
yes there would be 295.00 taken off for cases with timkens
no reason at all not to use a `01 case
call me @ 386-873-4427

Offline FASTnLOUDfxdwg

  • Member
  • Posts: 21
  • Country: us
Re: 124" DIY sale
« Reply #9 on: March 20, 2017, 10:47:33 AM »
What heads and cams do you reccomend for around 130/130

Offline prodrag1320

  • Moderator
  • Full Member
  • *****
  • Posts: 4985
  • Country: 00
  • AHDRA & AMRA national champion & record holder
    • vee twin racing
Re: 124" DIY sale
« Reply #10 on: March 23, 2017, 04:56:16 AM »
110 heads,but worked stock 07 up castings will get a 124" over 130/130