Author Topic: 1994, 80", FXDWG, EV27, Flowed Heads, S&S E, SE Mufflers  (Read 788 times)

0 Members and 1 Guest are viewing this topic.

Offline 94wideglide

  • Member
  • Posts: 6
  • Country: us
1994, 80", FXDWG, EV27, Flowed Heads, S&S E, SE Mufflers
« on: December 14, 2017, 09:36:36 AM »
Bored 40 over to clean up cyls
1.7 Rockers on intake
I posted this because of the EV27 thread in the EVO section.

[ Guests cannot view attachments ]

Offline kd

  • Site Supporter
  • Full Member
  • *****
  • Posts: 5553
  • Country: ca
Re: 1994, 80", FXDWG, EV27, Flowed Heads, S&S E, SE Mufflers
« Reply #1 on: December 14, 2017, 12:11:45 PM »
That's a healthy 80 (+) evo. Because your gearing will be a little lower than the late models, it looks like it comes on harder just about where you want it for highway truck passing.  :up:
KD

Offline Jonny Cash

  • Full Member
  • Posts: 461
  • Country: us
Re: 1994, 80", FXDWG, EV27, Flowed Heads, S&S E, SE Mufflers
« Reply #2 on: December 14, 2017, 08:46:16 PM »
That's a great 80" EVO. 
Accurate information is expensive, rare and difficult to find!

Offline 1workinman

  • Site Supporter
  • Full Member
  • *****
  • Posts: 944
  • Country: us
Re: 1994, 80", FXDWG, EV27, Flowed Heads, S&S E, SE Mufflers
« Reply #3 on: December 15, 2017, 08:15:13 AM »
Wow that getting it done lol glad I gave it a look

Offline JC 92FXRS

  • Site Supporter
  • Full Member
  • *****
  • Posts: 1075
  • Country: ca
Re: 1994, 80", FXDWG, EV27, Flowed Heads, S&S E, SE Mufflers
« Reply #4 on: December 15, 2017, 11:20:16 AM »
Very nice...I'd really like power like that on the highway.
Well done, Jeff
"never attribute to malice that which is adequately explained by incompetence"

Offline FSG

  • BrisVegas in Oz
  • Administrator
  • Full Member
  • *****
  • Posts: 16843
  • Country: au
  • BrisVegas
Re: 1994, 80", FXDWG, EV27, Flowed Heads, S&S E, SE Mufflers
« Reply #5 on: December 15, 2017, 12:45:45 PM »
 :up:

Offline TXCHOP

  • Full Member
  • Posts: 1680
  • Country: 00
    • Dan's MC Shop
Re: 1994, 80", FXDWG, EV27, Flowed Heads, S&S E, SE Mufflers
« Reply #6 on: December 15, 2017, 06:01:02 PM »
What was the compression set at, you know?
Nice looking chart!

Offline No Cents

  • Full Member
  • Posts: 8005
  • Country: us
  • there is no cure for what I got !
Re: 1994, 80", FXDWG, EV27, Flowed Heads, S&S E, SE Mufflers
« Reply #7 on: December 16, 2017, 04:29:30 AM »
 nice running Evo  :up:
08 FLHX my grocery getter, 124ci, wfolarry 110" heads, Burns pipe, 158/152 sae

Offline dsvracer

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 260
  • Country: 00
    • dan vance racing
Re: 1994, 80", FXDWG, EV27, Flowed Heads, S&S E, SE Mufflers
« Reply #8 on: December 16, 2017, 05:58:43 AM »
sweet looking dyno sheet.  that andy 27 is a good all around cam.   nice job.  dsv
FAST NOT FICTION
www.danvanceracing.com

Offline 94wideglide

  • Member
  • Posts: 6
  • Country: us
Re: 1994, 80", FXDWG, EV27, Flowed Heads, S&S E, SE Mufflers
« Reply #9 on: December 16, 2017, 10:14:19 AM »
Thanks guys for all the replies
I'm new here and i guess i should have put this in the first post with the dyno sheet.

The cases were line lapped and fitted with new bearings
Crank was rebuilt and balanced
Cylinders bored 40 over for 10.5 domed pistons
Heads- New guides, 1.9 intake valves, 1.615 Exhaust valves
Ported and flowed, Chambers cc to set compression
Piston deck -.007
Cam- EV27 with 1.7 ratio rockers on intakes and adjustable push rods
S&S Super E with ported and flowed manifold
DTT ignition with custom Map
Late dyna head pipe with low crossover and SE II mufflers with drilled baffles
Stock clutch with heavy clutch spring
Stock transmission gears with all new bearings and seals

I got 1400 miles on the new motor this year and have not done a ccp test yet, but i did not want compression releases and it starts with the shock starter and 2 year old battery so i don't think it to high

Offline sfmichael

  • Site Supporter
  • Full Member
  • *****
  • Posts: 5386
  • Country: us
  • Hoping to build the next mighty 'mouse'
Re: 1994, 80", FXDWG, EV27, Flowed Heads, S&S E, SE Mufflers
« Reply #10 on: January 16, 2018, 11:29:38 AM »
 :up: :up:  this looks like a great build - did Vic do all the work?
Colorado Springs, CO.