Author Topic: DynoJet: Looking for PC-V map for S&S T111  (Read 232 times)

0 Members and 1 Guest are viewing this topic.

Offline kabar

  • Member
  • Posts: 8
  • Country: us
Looking for PC-V map for S&S T111
« on: January 09, 2018, 02:09:34 PM »
New guy here.  In the process of installing an S&S crate T111 in a 2002 FLTRI.  HPI 55mm w/5.3 injectors, Fuelmoto Jackpot 2-1 exhaust, S&S air cleaner.  Tuner will be PC-V with Autotune.  Checked with Fuelmoto, S&S, Dynojet, and HPI.  No one has a map that would be a good base map.  Does anyone have something that would be a good start.

Also (may be a dumb question) but, would it work to flash a Powervision map to the ECM using the shops Powervision (to allow for injector mods, etc.) then revert to the PC-V map for autotune.  If so, anyone have a PV map for this configuration?

Thanks for any help.

Offline FXDBI

  • Full Member
  • Posts: 2460
  • Country: ca
Re: Looking for PC-V map for S&S T111
« Reply #1 on: January 09, 2018, 06:21:33 PM »
Do that crate engine a favor and just have it properly tuned with the power vision. Bob

Offline kabar

  • Member
  • Posts: 8
  • Country: us
Re: Looking for PC-V map for S&S T111
« Reply #2 on: January 09, 2018, 06:39:54 PM »
Planning to.  Just need something for break-in and to get it to a tuner.

Offline harleytuner

  • Full Member
  • Posts: 3017
  • Country: us
    • Wide Open Cycles
Re: Looking for PC-V map for S&S T111
« Reply #3 on: January 10, 2018, 01:59:46 PM »
Planning to.  Just need something for break-in and to get it to a tuner.

S&S should have a PV starter MAP for you. 
Enjoying the hell out of my "hotted" up twincam

Offline kabar

  • Member
  • Posts: 8
  • Country: us
Re: Looking for PC-V map for S&S T111
« Reply #4 on: January 12, 2018, 01:11:41 PM »
I thought so also, but they said "call Dynojet".  Dynojet has nothing but, suggests using a 96" map and reconfigure the autotune to allow greater than the existing window of modifications.  Oh well.