Author Topic: TTS: status bit name  (Read 174 times)

0 Members and 1 Guest are viewing this topic.

Online 60wt

  • Full Member
  • Posts: 156
  • Country: us
status bit name
« on: January 17, 2018, 12:10:37 PM »
(Blackl interface..sae j-1850)       I'm checking My Datamaster 2  and I see 'Status Bit  Name'...    Engine run mode- is red with the No. 1 and it never changes when you run the bar across the page...        Vehicle tipped- green with an 0....I get that one.............           VTD Active- is red with a No. 1.... no Idea what that means..           .02 Feedback Rich/Lean and it changes back and forth to green and red with the NO. 1 in each color...        How is that all interpreted ..????
I'm going nucking futs

Offline rigidthumper

  • Administrator
  • Full Member
  • *****
  • Posts: 4346
  • Country: us
  • Buying a scalpel, don't make you a surgeon.
Re: status bit name
« Reply #1 on: January 17, 2018, 12:43:12 PM »
Engine run mode - 0 = engine off, 1 = engine on
VTD- Vehicle Theft Deterrent- 0 = not active, 1 = active
02 feedback 0 = lean, 1 = rich
The DataMaster help files contain all the definitions, and the tuning guide some tuning assistance.