Author Topic: 114” cylinder & Pistons  (Read 560 times)

0 Members and 1 Guest are viewing this topic.

Offline Nastytls

  • Full Member
  • Posts: 682
  • Country: us
114” cylinder & Pistons
« on: February 17, 2018, 02:57:52 PM »
Are they available separate from the stage 3 kit?

Offline happyman

  • Full Member
  • Posts: 1494
Re: 114” cylinder & Pistons
« Reply #1 on: February 17, 2018, 06:03:21 PM »
Are they available separate from the stage 3 kit?

last time  looked they were


Offline Nastytls

  • Full Member
  • Posts: 682
  • Country: us
Re: 114” cylinder & Pistons
« Reply #2 on: February 17, 2018, 07:24:25 PM »
Would you happen to know the part number? I can’t find it.

Offline happyman

  • Full Member
  • Posts: 1494
Re: 114” cylinder & Pistons
« Reply #3 on: February 17, 2018, 08:00:52 PM »
Would you happen to know the part number? I can’t find it.
should be avalilable on  HD web page  and perhaps under the  SE parts

Offline FXDBI

  • Full Member
  • Posts: 2337
  • Country: ca
Re: 114” cylinder & Pistons
« Reply #4 on: February 17, 2018, 10:01:00 PM »
Its all in the SE catalogue.  Bob

Replacement cylinders for ’18-later Softail® and ’17-later
Milwaukee-Eight models equipped with Screamin’ Eagle Stage
III and IV kits.
16800120 Black Highlighted. $389.95
16800125 Black Granite. $389.95
16800174 Black (non-highlighted). $389.95

21900084 4.075" Bore x 4-3/8" Stroke –
107 to 114CI Conversion. $349.95
Replacement pistons for ’18-later Softail and ’17-later Touring
models equipped with Screamin’ Eagle Milwaukee-Eight
Stage III and IV 107-114CI kit.
« Last Edit: February 17, 2018, 10:05:13 PM by FXDBI »

Offline Nastytls

  • Full Member
  • Posts: 682
  • Country: us
Re: 114” cylinder & Pistons
« Reply #5 on: February 18, 2018, 02:33:03 AM »
Thank you!

I must have been blind :embarrassed:

Offline GMR-PERFORMANCE

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 5716
  • Country: 00
Re: 114” cylinder & Pistons
« Reply #6 on: February 21, 2018, 11:34:33 AM »
Do not forget that taking your stock cylinders to the 117 mark is done easily and still retain a thick liner..  Cost wise it would be much less as well If I where buying  new I would opt for the 114/117 OEM and bump to the 120 mark .
www.gmrperformance.com  www.compensaver.com
817-741-2000   FORT WORTH TX

Offline Nastytls

  • Full Member
  • Posts: 682
  • Country: us
Re: 114” cylinder & Pistons
« Reply #7 on: February 21, 2018, 03:35:48 PM »
Going to hold off on the big bore for now, just 475’s exhaust and intake.

Offline GMR-PERFORMANCE

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 5716
  • Country: 00
Re: 114” cylinder & Pistons
« Reply #8 on: February 22, 2018, 06:29:34 AM »
Nothing wrong with that .. Look forward to seeing the results . :up:
www.gmrperformance.com  www.compensaver.com
817-741-2000   FORT WORTH TX