Author Topic: fuel injection to carborator swap  (Read 1347 times)

0 Members and 1 Guest are viewing this topic.

Offline branas123

  • Member
  • Posts: 10
fuel injection to carborator swap
« on: April 25, 2011, 10:14:13 AM »
i have a 07 fire bolt 1200 engine i am putting in my sportster and i am having to carborate it,  how do i wire it, the wiring harness for the sportster is different, like the cam position sensor on the buell engine has 3 wires and the sportster has 5. is there a kit to buy, i bought buell manual but it doesnt have what each individual wires are. how do i wire it?

Offline panhead_dan

  • Full Member
  • Posts: 290
Re: fuel injection to carborator swap
« Reply #1 on: April 29, 2011, 07:12:01 AM »
I would look into something like a Dyna ignition and just delete the cam position sensor as well as all the others and the ECM.

I know this isn't much help but I am very interestd in your project. Please post up progress.

Offline Midas

  • Member
  • Posts: 1
Re: fuel injection to carborator swap
« Reply #2 on: March 05, 2013, 05:31:03 PM »
I would look into something like a Dyna ignition and just delete the cam position sensor as well as all the others and the ECM.

I know this isn't much help but I am very interestd in your project. Please post up progress.


I converted an XR1200 to carb using a German (AMM - P3 HIGH-PERFORMANCE. MOTORCYCLE IGNITION) ignition unit, the XR uses the crank sensor and does not have a cam sensor, so I would advise you contact this guy to see if his ignition unit will work on the Buell

http://www.amm.haan.de/