Author Topic: Belt adjustment  (Read 879 times)

0 Members and 1 Guest are viewing this topic.

Offline tmwmoose

  • Site Supporter
  • Full Member
  • *****
  • Posts: 2602
  • Country: 00
Belt adjustment
« on: March 19, 2014, 06:29:16 PM »
Hey guys , I have a 95 buell in the shop and need to adjust the belt could someone give me the spec's please and thanks!!

Offline garyajaz

  • Full Member
  • Posts: 2462
Re: Belt adjustment
« Reply #1 on: March 22, 2014, 09:13:29 PM »
found some specs.
but which model/?  blast??

Offline tmwmoose

  • Site Supporter
  • Full Member
  • *****
  • Posts: 2602
  • Country: 00
Re: Belt adjustment
« Reply #2 on: March 22, 2014, 09:17:50 PM »
1995 S1 lighting

Offline garyajaz

  • Full Member
  • Posts: 2462
Re: Belt adjustment
« Reply #3 on: March 22, 2014, 10:26:24 PM »
hell, cant find site.  had a line drawing with all the stuff.

but anyway
the gist of it is

1.5-1.75 in. (38.1-44.5 mm) deflection with 10 lbs (4.5 kg of upward force)
applied to center of lower span. Measurement must be taken with rear suspension
fully unloaded. NOTE: The rear suspension is considered fully
unloaded when the motorcycle’s weight is not compressing the rear shock. It
is not necessary to raise the rear wheel off the ground to reach this point.


oh also those couple years had a recall for broken swing arms.
here is link..
http://www.buellx1-li.ch/Buell%20Recall-Liste/Buell%20Service%20Bulletin%20B-25A%20-%20B025A-263572.pdf


Offline tmwmoose

  • Site Supporter
  • Full Member
  • *****
  • Posts: 2602
  • Country: 00
Re: Belt adjustment
« Reply #4 on: March 23, 2014, 06:26:59 AM »
thanks Gary that will work !