0 Members and 1 Guest are viewing this topic.
Do the rockout rocker lockers work with the SE forged rocker supports ?
Just wanted to let others know that these worked in sportster rocker support plates. I just did the front support plate(warranty job) and there is a noticeable difference between front and rear where both were noisy before.2015 XL1200 1600 miles.
Has anyone tried these in S&S billet or cast rocker boxes?
So school me on Sportsters a little.... are they like twin cam engines in that the rocker assemblies are all the same... 883, 1200, etc? All years or only some?
Quote So school me on Sportsters a little.... are they like twin cam engines in that the rocker assemblies are all the same... 883, 1200, etc? All years or only some?Sportsters with the Evo Engine use the same Rocker Shafts and Rocker Arms that all Big Twin Evo and TCs use. But like the Big Twin Evo their support is built in to the Inner Rocker Cover and they use different bolts to a TC.http://harleytechtalk.com/index.php/topic,87675.msg996752.html#msg996752
Since Joe said my inserts worked on his Sporster, I have to assume at least the bolt diameter is the same?
Quote from: turboprop on December 26, 2015, 08:28:57 AMHas anyone tried these in S&S billet or cast rocker boxes? I don't know about the S&S assemblies. They do work in all twin cam, and SE forged. I have heard they are a little too small for Woods offset supports, but I'm working on that. If you have the S&S assemblies & want to be a tester, let me know. John
Quote from: Rockout Rocker Products on December 26, 2015, 04:45:29 PMQuote from: turboprop on December 26, 2015, 08:28:57 AMHas anyone tried these in S&S billet or cast rocker boxes? I don't know about the S&S assemblies. They do work in all twin cam, and SE forged. I have heard they are a little too small for Woods offset supports, but I'm working on that. If you have the S&S assemblies & want to be a tester, let me know. JohnI have the both types of rocker boxes and will try them on the next build using the case boxes. Will post the results here and if needed any adjustments. My knee jerk reaction is to hope the bolt holes in the S&S supports are slightly smaller than the harley supports and can have enough material to allow them to be reamed to the proper size to use these.
Installed them on my 2012 Street Bob, nice and quit now.
will they work with The Screaming Eagle rocker support?
Thanks, they'll be in the mail tomorrow. John
How hard are they to remove? Say if you have to replace a rocker arm?
I have lots of happy users with 110's. Here's a quote from an PM I received on the "other forum" yesterday..."after all the praise for your kit, finally broke down and bought one for my 2013 cvo roadglide. didn't know it at the time, but the 110 on that bike made a hell of a racket. I didn't think it was that bad, and so was not expecting as dramatic a difference as I got. went through the complete installation of the kit, and have to say, it works amazing! bike is now very quiet."
Quote from: Rockout Rocker Products on February 09, 2016, 05:04:26 AMI have lots of happy users with 110's. Here's a quote from an PM I received on the "other forum" yesterday..."after all the praise for your kit, finally broke down and bought one for my 2013 cvo roadglide. didn't know it at the time, but the 110 on that bike made a hell of a racket. I didn't think it was that bad, and so was not expecting as dramatic a difference as I got. went through the complete installation of the kit, and have to say, it works amazing! bike is now very quiet." Thanks for the feedback, tried to order 2 sets from ebay and Amazon unfortunately these items can't be shipped internationally
Quote from: Sarhan on February 22, 2016, 11:29:00 PMQuote from: Rockout Rocker Products on February 09, 2016, 05:04:26 AMI have lots of happy users with 110's. Here's a quote from an PM I received on the "other forum" yesterday..."after all the praise for your kit, finally broke down and bought one for my 2013 cvo roadglide. didn't know it at the time, but the 110 on that bike made a hell of a racket. I didn't think it was that bad, and so was not expecting as dramatic a difference as I got. went through the complete installation of the kit, and have to say, it works amazing! bike is now very quiet." Thanks for the feedback, tried to order 2 sets from ebay and Amazon unfortunately these items can't be shipped internationally That's strange... Bahrain is one of the countries that ebay lists in it's global shipping program, you should have no trouble there.I can get 2 kits to you directly for $40 shipped, PM me if you'd like to order & we'll work it out. Thanks, John @ Rockout.
Quote from: Rockout Rocker Products on February 23, 2016, 04:37:53 AMQuote from: Sarhan on February 22, 2016, 11:29:00 PMQuote from: Rockout Rocker Products on February 09, 2016, 05:04:26 AMI have lots of happy users with 110's. Here's a quote from an PM I received on the "other forum" yesterday..."after all the praise for your kit, finally broke down and bought one for my 2013 cvo roadglide. didn't know it at the time, but the 110 on that bike made a hell of a racket. I didn't think it was that bad, and so was not expecting as dramatic a difference as I got. went through the complete installation of the kit, and have to say, it works amazing! bike is now very quiet." Thanks for the feedback, tried to order 2 sets from ebay and Amazon unfortunately these items can't be shipped internationally That's strange... Bahrain is one of the countries that ebay lists in it's global shipping program, you should have no trouble there.I can get 2 kits to you directly for $40 shipped, PM me if you'd like to order & we'll work it out. Thanks, John @ Rockout.Thanks for your offer to help, I have ordered the kits and sent them to one of my friends at taxes speed he will send them along with my car partsThanks again
Did you ever get confirmation on your testing for the EVO 1340? I sent you an email through your website as well, but I have 1996 Heritage Softail and wouldn't mind giving this a try.Thanks Ordered a set for my 110 motor as well and they arrived 3 days later. That's quick, I think. I also have a 96 Heritage and would like to know if they will work in the 1340 EVO. Thanks
Ordered a set for my 110 motor as well and they arrived 3 days later. That's quick, I think. I also have a 96 Heritage and would like to know if they will work in the 1340 EVO. Thanks
Quote from: J F Go on April 05, 2016, 12:59:07 PM Ordered a set for my 110 motor as well and they arrived 3 days later. That's quick, I think. I also have a 96 Heritage and would like to know if they will work in the 1340 EVO. Thanks Thank you very much for purchasing my Rockout kit. I'll send you a PM about the Evo inserts in a few.I was unable to click on your link,but Id be up for that.John @ Rockout
I like the fit of the bolt after installation. Takes the slop out. I am putting these in the other holes as well.
Quote from: Rockout Rocker Products on April 05, 2016, 05:14:00 PMQuote from: J F Go on April 05, 2016, 12:59:07 PM Ordered a set for my 110 motor as well and they arrived 3 days later. That's quick, I think. I also have a 96 Heritage and would like to know if they will work in the 1340 EVO. Thanks Thank you very much for purchasing my Rockout kit. I'll send you a PM about the Evo inserts in a few.I was unable to click on your link,but Id be up for that.John @ Rockout
I'm expecting mine in the mail tomorrow. They are going in the front rocker box on my 2005 Road King that I have been chasing this weird noise for a couple years on. If this don't stop it I'm done looking and will live with noise. One of my bolts has the c shaped mark were shaft has been tapping on it but just the top mark like an O with the bottom missing.
Do you know if these will work with Vulcan Engineering billet rocker supports for Twin Cam motors? I have a set of these supports on the way for a 124 build.
Quote from: Ohio HD on April 08, 2016, 02:43:10 AMDo you know if these will work with Vulcan Engineering billet rocker supports for Twin Cam motors? I have a set of these supports on the way for a 124 build. Sorry, I don't have any experience with those. When you get them, let me know the hole sizes & if the standard Rockouts won't fit, we'll come up with a version that will. John
Finally got around to installing these in my 07 SERK and the ticking is gone. That ticking was so annoying and hearing the same old line "they all do that" was kinda tipping me over. Glad its gone. Thank you for taking the time to figure it out and the effort to correct it.
Got my rockouts installed today into my SE forged supports using S&S roller rockers and shafts . The rockouts installed easily , they can be installed upside down in the SE supports so make sure the small tapered end is down . Didn't need much force to seat them , i did it by hand . It will be a while until i get my motor together and running , i will report my final findings then . The Rockouts seem like a great product ! I cant wait to hear the difference !
Just wanted to chime in here and say that Rockout inserts cured an annoying tap I had in my almost bone stock 110". I had witness marks on two bolts. TN
I wasn't sure about the right vendor I used but I am now. My kit had five inserts and purchased thru amazon prime. I turned my local indy on to them and he purchased fifteen sets to start off with.Again, such a simple solution for a specific tap tap. Rock OnTN
Quote from: TN on June 26, 2016, 07:06:02 AMI wasn't sure about the right vendor I used but I am now. My kit had five inserts and purchased thru amazon prime. I turned my local indy on to them and he purchased fifteen sets to start off with.Again, such a simple solution for a specific tap tap. Rock OnTNAgree
Hi John, you have a PM.
Quote from: Durwood on August 10, 2016, 10:17:40 AMHi John, you have a PM. Got it, Rockout kits on the way. Thank you very much for your orders. John
Not much talk on these for BT EVO
Hey john, I have been using these in all of the builds I have been doing and will be including them in stage 2 packages as well.Glad you found a simple solution
First I have seen anything about this ........ I will be sure to try them out next time I'm into a twin cam!
Great product, quick shipping, easy install, and they work. Installed mine last weekend and very pleased with results. Word of mouth is best advertising out there. Thanks!!!!!!!!!!
Do you have an EVO version ?