Author Topic: First T&T with my new engine  (Read 2269 times)

0 Members and 1 Guest are viewing this topic.

Offline 2006FXDCI

  • Full Member
  • Posts: 2529
  • Country: 00
  • Born to lose
Re: First T&T with my new engine
« Reply #25 on: June 02, 2016, 03:09:35 PM »
Thanks Ando ! Have you had your dyna to the track lately ? You flew right by the 11 sec club into the 10 sec club  :chop:
2006 Super glide 107" , 2005 electra glide 124"

Offline RXBOB

  • Full Member
  • Posts: 1024
  • Country: au
Re: First T&T with my new engine
« Reply #26 on: June 03, 2016, 05:22:25 AM »
Thanks Ando ! Have you had your dyna to the track lately ? You flew right by the 11 sec club into the 10 sec club  :chop:

Hopefully get back in November, heard on the radio today that the people that have run the joint have no intentions to run it next session so hopefully someone else has a crack

Offline pwmorris

  • Full Member
  • Posts: 1959
  • Country: us
Re: First T&T with my new engine
« Reply #27 on: June 03, 2016, 11:59:22 AM »
3rd pass



https://m.youtube.com/watch?v=xQQYFMe7UdQ

Looks great-
No reason you can't get that bike in the 1.60's 60 ft, which will give you another tenth or two on the big end, which is an 11.3-11.4 right there.

Pretty cool! Looks like a lot of fun!

I basically work across the freeway from Firebird Raceway, now called Wild Horse Pass Motorsports Park, just outside of Phx. & frequently hear/feel the race boats blasting off across the lake there.


I have raced on that track a few times-pretty nice track and a great place for some T&T.
Check track officials for what you need for test and tune online or call before you go.

Offline 2006FXDCI

  • Full Member
  • Posts: 2529
  • Country: 00
  • Born to lose
Re: First T&T with my new engine
« Reply #28 on: June 04, 2016, 05:59:19 AM »
Thanks Paul ! Thats the goal for this year , Im shooting for a 11.5 or better . The shift light has most definitely helped in keeping my shifts consistent . Just gotta get better at my starts .
2006 Super glide 107" , 2005 electra glide 124"

Offline Azgunner

  • Full Member
  • Posts: 672
Re: First T&T with my new engine
« Reply #29 on: June 10, 2016, 10:44:32 PM »
Are you running a carb or efi?
"All that is necessary for evil to triumph is for good men to do nothing"

Offline 2006FXDCI

  • Full Member
  • Posts: 2529
  • Country: 00
  • Born to lose
Re: First T&T with my new engine
« Reply #30 on: June 11, 2016, 06:25:06 AM »
EFI
2006 Super glide 107" , 2005 electra glide 124"

Offline Azgunner

  • Full Member
  • Posts: 672
Re: First T&T with my new engine
« Reply #31 on: June 12, 2016, 01:38:23 PM »
EFI

My reason for asking is I've seen it mentioned one of the requirements is an S&S induction system. I currently run a 45mm Mikuni, but do have a G carb kit available if I ever decide to give it a try.
"All that is necessary for evil to triumph is for good men to do nothing"

Offline 2006FXDCI

  • Full Member
  • Posts: 2529
  • Country: 00
  • Born to lose
Re: First T&T with my new engine
« Reply #32 on: June 12, 2016, 01:41:42 PM »
They never mentioned any requirements as far as using S&S parts to me . I do use allot of S&S parts in my engine but they never asked me about it .
2006 Super glide 107" , 2005 electra glide 124"