Author Topic: 2001 Sportster No Oil to Front Cylinder  (Read 294 times)

0 Members and 1 Guest are viewing this topic.

Offline CHausmann96

  • Member
  • Posts: 1
  • Country: us
2001 Sportster No Oil to Front Cylinder
« on: May 30, 2016, 05:47:53 PM »
This past weekend I pulled apart my 2001 Sportster 1200C. I put a new head gasket and all new rocker gaskets because my front cylinder was leaking. I made sure every oil passages were clear. From the head to the top rocker. I couldn't get oil. I check the ball valve behind the oil filter and still no oil. I took off the top rocker and cranked it over and I can't seem to get any oil to the front cylinder only. Can anyone help?


Sent from my iPhone using Tapatalk

Offline hogpipes1

  • Full Member
  • Posts: 1507
  • Country: 00
  • 49 FL Pan My 1st Bike in 1963
Re: 2001 Sportster No Oil to Front Cylinder
« Reply #1 on: June 01, 2016, 10:14:53 PM »
p-rods  in right location? all the oil comes up threw them , all holes clean?  if all is good  fill the p-rods with oil after dropping them in there holes , prime the pump as they say. the rockers  need to be tighten down  to put pressure  on the lifters to get the oil to pump up .