March 28, 2024, 11:51:02 AM

News:


1998 Superglide Electrical Panel Support

Started by Mikeg, September 02, 2019, 03:36:05 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Mikeg

I just got done welding up the support bracket behind the ignition, fuses and TSM. A few years ago the front portion cracked and I had it welded. I was riding yesterday and heard a noise. I found the same support had cracked again. This time in the rear portion. Anyone else have this problem? There is no replacement part for this...it is a part of the frame.

Burnout

A picture of what is broken would be worth 1000 words.
They don't call me Ironhead Rick just because I'm "hard headed"

Hossamania

Breaks such as this are often caused by excessive vibration. Try and eliminate as much as possible, exhaust mounting is most often a culprit, worn or out of alignment motor mounts, loose pegs, etc.
If the government gives you everything you want,
it can take away everything you have.

Deye76

I take it this a Dyna model. Get a support plate between the motor and trans.
http://carlinidesign.com/Torque-Arms/
East Tenn.<br /> 2020 Lowrider S Touring, 2014 CVO RK,  1992 FXRP