85 FXR pipe

[Prostock]

Any recommendations for a performance pipe, 2-1, for a 85 FXR with a S&S 113 crate motor.

[Burnout]

A ThunderHeader is my fave.



As I recall this is a Dyna pipe and does not clear mid controls perfectly, needs a small dent or a small spacer under the front motor mount. So I have removed my mids. My forward controls are Kuryakyn.

[pwmorris]

A ThunderHeader is my fave.



As I recall this is a Dyna pipe and does not clear mid controls perfectly, needs a small dent or a small spacer under the front motor mount. So I have removed my mids. My forward controls are Kuryakyn.

[92flhtcu]

SuperTrapp cam out with a nice FXR 2:1 in raw stainless or polished stainless. uses their Disc set up for tuning

[jughead]

R&B exhaust       https://www.rbracing-rsr.com/lsr21/dynafxr.html

[Burnout]

https://www.rbracing-rsr.com/lsr21/dynafxr.html

Primary tubes are too short for optimum at street RPMs.
Look at the length difference on my T/H.
I sold my ProPipe after I installed the T/H.
Pro pipe is very similar to the RB pipe.