Part Number request

[Justpassingas]

I need a part # or aftermarket replacement for the rubber damper piece between the floorboards and the floorboard insert on an 09 SG....The dealer said they don't have/make them and you need to buy the insert     I cant be the first person that's ever replaced these    TIA

[rigidthumper]

like this? https://www.jpcycles.com/product/5500030/j-p-cycles-replacement-floorboard-bumpers

[Hossamania]

I think the picture in the op is actually the bumper torn away from the rubber pad. I have replaced mine a couple times, you have to buy the whole pad, those bumpers/inserts are molded to the foot pad.

[chaos901]

Yep, all one piece.  Least it starts that way.  Replaced a few.

[Justpassingas]

 upon further review...I took it off and apart and this is what I found...ayup...gonna have to buy the whole pad....thanx guys

[motorhogman]

Geesh !  I made my own out of automotive radiator isolators.

Could have saved myself a lot of time if I had those lil buggers.

As said the bumpers and rubber is all one piece..

I drilled the foot board rubbers, used stainless steel hardware and mounted them that way.

Had them on quite a while now and they work great.

[Hossamania]

Geesh !  I made my own out of automotive radiator isolators.

Could have saved myself a lot of time if I had those lil buggers.

As said the bumpers and rubber is all one piece..

I drilled the foot board rubbers, used stainless steel hardware and mounted them that way.

Had them on quite a while now and they work great.

That's my next option when I get too cheap to buy new floor board pads!
Of course, it won't be stainless steel hardware, but mismatched zinc hardware I have laying around, should rust up and look like hell in no time.

[Justpassingas]

Dealer didn't have em in stock...$120 later...hopefully I'll get another 10years/ 100k out of them...

[Hossamania]

$120? Are they made of gold?
Did you buy the whole assembly, or just the rubber pads?

[motorhogman]

$120? Are they made of gold?
Did you buy the whole assembly, or just the rubber pads?

Must be the complete assembly.

When I checked the rubbers were about $30.00 each..

[PoorUB]

$120? Are they made of gold?
Did you buy the whole assembly, or just the rubber pads?

Must be the complete assembly.

When I checked the rubbers were about $30.00 each..

Ronnie's, the rubber pad only, $53 each. I would imagine a dealer will be a few $$ higher. The run of the mill foot pads for an E Glide, or Limited or $30 each. Them there SG pads are special, to make it go faster.

[Justpassingas]

$61 each but I paid $54.25 each plus tax with my VIP discount...I would've preferred a cheaper plain old black rubber ones but....