Author Topic: 2017, 143", FLHR, ward performance heads and intake  (Read 3205 times)

Mogollon and 1 Guest are viewing this topic.

Offline jbroski

  • Full Member
  • Posts: 132
  • Country: us
Re: 2017, 143", FLHR, ward performance heads and intake
« Reply #25 on: October 28, 2019, 06:31:23 AM »
How did you run at Hogs gone wild at silver dollar raceway ?
not to sound arrogant but it dominates as of right now. 9.53 best, consistant 9.6's.  have some more in the works. Compression, cam, heads
« Last Edit: October 28, 2019, 07:05:13 AM by jbroski »

Offline anImel

  • Full Member
  • Posts: 76
  • Country: us
    • Instagram
Re: 2017, 143", FLHR, ward performance heads and intake
« Reply #26 on: October 28, 2019, 04:45:45 PM »
How did you run at Hogs gone wild at silver dollar raceway ?

Pretty sure he won Hot Street.   :chop:

Offline Goopdienes

  • Member
  • Posts: 18
  • Country: us
Re: 2017, 143", FLHR, ward performance heads and intake
« Reply #27 on: October 30, 2019, 06:11:07 PM »
is this a race motor only or would you ride it on the street

Offline kd

  • Site Supporter
  • Full Member
  • *****
  • Posts: 7005
  • Country: ca
Re: 2017, 143", FLHR, ward performance heads and intake
« Reply #28 on: October 31, 2019, 06:20:32 AM »
is this a race motor only or would you ride it on the street

See reply # 9
KD

Offline jbroski

  • Full Member
  • Posts: 132
  • Country: us
Re: 2017, 143", FLHR, ward performance heads and intake
« Reply #29 on: November 20, 2019, 06:12:20 AM »
new heads, cam and lower compression, only had .010" thicker head gasket on hand

Offline jbroski

  • Full Member
  • Posts: 132
  • Country: us
Re: 2017, 143", FLHR, ward performance heads and intake
« Reply #30 on: November 20, 2019, 06:13:25 AM »
before and after

Offline 98fxstc

  • Site Supporter
  • Full Member
  • *****
  • Posts: 1336
  • Country: au
Re: 2017, 143", FLHR, ward performance heads and intake
« Reply #31 on: November 20, 2019, 01:26:04 PM »
 :up: :up: :up: :up: :up:

would be interesting to compare flow charts for the heads

Offline Nastytls

  • Full Member
  • Posts: 1157
  • Country: us
Re: 2017, 143", FLHR, ward performance heads and intake
« Reply #32 on: November 20, 2019, 03:22:32 PM »
More power w/ less compression. Win win.

Offline kcbike

  • Full Member
  • Posts: 93
  • Country: us
Re: 2017, 143", FLHR, ward performance heads and intake
« Reply #33 on: November 23, 2019, 07:23:32 AM »
Very nice to have more hp  and tq with less compression. Did Rick do your new heads also ?

Offline 1workinman

  • Site Supporter
  • Full Member
  • *****
  • Posts: 1373
  • Country: us
Re: 2017, 143", FLHR, ward performance heads and intake
« Reply #34 on: November 29, 2019, 04:32:26 PM »
Is this the bike motor that put it on the busa lol . I read a post on my phone at work that showed a bike Harley putting it on a Busa . I wish I could have seen that . and a bagger also damn lol

Offline jbroski

  • Full Member
  • Posts: 132
  • Country: us
Re: 2017, 143", FLHR, ward performance heads and intake
« Reply #35 on: November 30, 2019, 09:11:28 AM »
i'm starting to feel bad for the guy on the busa. my goal is to catch up to GB3, need .15 and a diet

Offline jbroski

  • Full Member
  • Posts: 132
  • Country: us
Re: 2017, 143", FLHR, ward performance heads and intake
« Reply #36 on: November 30, 2019, 09:44:34 AM »
Very nice to have more hp  and tq with less compression. Did Rick do your new heads also ?


yes, ward performance heads, new intake side with +2 mm valve

Offline 1workinman

  • Site Supporter
  • Full Member
  • *****
  • Posts: 1373
  • Country: us
Re: 2017, 143", FLHR, ward performance heads and intake
« Reply #37 on: November 30, 2019, 01:05:33 PM »
i'm starting to feel bad for the guy on the busa. my goal is to catch up to GB3, need .15 and a diet
yea  GB3 bike runs pretty good also . I think the twin cam bike is for sale last for heard ..congratulations on the win