PCV

[rbabos]

If one decides to tune with PCV for boost, can the existing TTS mt7 cal remain in the ECM and act as the Stock cal or do you need to load the saved MTE into the ECM prior to going with a PCV cal?
Ron

[98fxstc]

You need to load the MTE file to get access to the ecm with any other tuner.

[Coyote]

I would think you can use the PCV over the tts tuned bike, same as stock.

[rigidthumper]

PC5 can be used over the top of whatever is in the ECM.

[rbabos]

Good to know. Figured since since it's piggy back, it could care less what's in the ECM.  The MTE with TTS/PV stuff, yes, I was aware of that. They are not friends.  Thanks for the responses.
Ron

[98fxstc]

You need to load the MTE file to get access to the ecm with any other flash tuner.

should have had the flash in there 
sorry, was thinking powervision not power commander

[rbabos]

You need to load the MTE file to get access to the ecm with any other flash tuner.

should have had the flash in there 
sorry, was thinking powervision not power commander

No problem.
Ron