March 28, 2024, 10:27:33 PM

News:


Injector Size In Calibration

Started by rbabos, December 14, 2019, 02:45:10 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

rbabos

Expert advice needed. Stock v rod injectors are 4.8 g/s @ 4 bar or 58 psi. Going SC and updated MM IWP189 injectors and 5 bar or 72psi regulator and updated pump. The IWP189 specs list it as 5.8 g/s @ 3 bar or 43 psi pressure.
What should I list the injector size in the calibration?  Bike is only going to 6psi boost so not extreme. Thanks.
Ron

rigidthumper

Ignorance is bliss, and accuracy expensive. How much of either can you afford?

rbabos


Ohio HD