M8 Cams - Spreadsheet & PDF

[Ohio HD]

Well, we have a new cams comparator coming soon. I forgot that I had already added the CR480MT with all zero values. So it's in there, just nothing to see here.   

[itsafatboy]

Which cam would you go with for a 117 ST Heritage. Cam change with a 2 into 1 ex.

andrew 485 , this cam repeats dyno numbers , 117" with 6.2 inj, 60mm throttle , getting 132/139 area multiple times , call and talk to steve at GMR performance , he only supports what tests out on dyno and these curves are nice a striate
last one was with a billet cat , but even with other pipes the cam just reproduces numbers   

[BilgeSnipe]

Found this for the Wood Performance WM-22XD

[BilgeSnipe]

You cannot view this attachment.

[Ohio HD]

We added a new Zippers camshaft to the M8 Interactive Cam Comparison app.

Zippers has an RS528 that's for the 2024 117" and 121" GEN #2 motors.



You cannot view this attachment.

[Luke119]

Nice job on the Comparator!

Can I still get a spreadsheet?  I love visually comparing all the numbers across the board.

[Ohio HD]

There will be a new Cams Comparison application uploaded to the Tools section soon.

These two cams were added, compliments of rigidthumper.


HD SE8-511 cam
Front
I-3/25, .511" 208° TDC .102"
E-40/3, .511" 217° TDC .091"
Rear
I-1/23, .511" 202° TDC .102"
E-43/6, .511" 217° TDC .091"


Cycle Rama CR 480MT
I-11.7/14.3, .480" 206° TDC .104"
E-50.0/14.0, .470" 244° TDC .096"

[Ohio HD]

We have two more M8 cams that were added to the cams data. These are also from rigidthumper.



Andrews 485
I  7.5/29.5.  .485", 217°    101
E  52.5/14.5, .485", 247°    109

Andrews 465B
I  10/20, .464", 210°    95   
E  46/10, .460", 236°  108