I fired my project today

[Hossamania]

Ronnie's has parts microfiche, you can look up a carb breakdown for your year and model to help.

http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc

[Scotty]

CV Performance have lots of parts for the CV
https://cv-performance.com/cvp-needle-jet

[14GuineaPig]

This guy put out several videos on the CV carbs.  Here's a link for the first video.

https://www.youtube.com/watch?v=3FmfO-mWv3Q

[Mule]

Parts are on the way , and will be here tomorrow ,Amazon Prime.

[JW113]

I had no idea there was CV copies on ebay.   

Yep. I have one. Pretty uncanny how it appears identical to the original Keihin. No issues at all with it.

Also, they make S&S and Mikuni clones as well. Can't imagine how they get away with it.

-JW

[Mule]

Tossed the Harley CV and put on a clone after many failed attempts to get it to run right! Fires right up and runs perfect with the clone. 45 slow jet/180 main.  The clones are different from the harley CV the jets are different and there is no overflow vent or drain screw in the bowl. It works good ... Thanks everyone...

[Leed]

Good to hear you've got it running!

[freddie_ray]

Mule, nice ride. The last time I fiddled with a CV Carb was 07 when I piped my 05 WG. I followed the advise of Joe Minton, Google him. Get yourself a Mikuni if funds allow or an S&S, or locate a Stock HD CV Carb, but leave Ebay alone. That crap ain't worth the headache,

freddie_ray 

[Mule]

I live in the remote foothills of Central California and this bike was built with mostly parts from ebay!  swap meets and online forums ...