S&S Fly Wheels

[Prostock]

Opens some doors for future builds.  Drag says available in June.

[groundhog143]

4 5/8 Good Times..

[No Cents]

4 5/8 Good Times..

     
I'd say in a couple hours time we could be looking at your stock one.

[TXChop]

So sad, i just dropped a ton of money on a 124. But glad to see S&S in the M8 crank game!

[wfolarry]

The MOCO raised their prices on flywheels so I think more people will be looking at S&S when they need a replacement. For a little more money they'll get a much better flywheel.

[rigidthumper]

Build a nice little 135" touring motor 

[Don D]

Already had a set of wheels slip and rods were bad, 4.5 stroke.
New Harley Wheels are $1000

[1workinman]

The MOCO raised their prices on flywheels so I think more people will be looking at S&S when they need a replacement. For a little more money they'll get a much better flywheel.

I not a Harley mechanic but I got bit by Harley cranks once and I would not care if SS cranks were higher as in my option you get a better product . I sure that there has been a lot of builds with the stock crank but If I were going to invest that much I want a good crank and not Harley just me 

[adayrider]

Build a nice little 135" touring motor 

Is that what 128 cylinders and 4 5/8 stoke come to? 135?
What about the new 131 cylinders and 4 5/8 stroke?

[rigidthumper]

That is the 131 cylinders

[Don D]

Apparently they will have .060 shorter ch pistons .

[kd]

Shorter where?  Deck surface or skirt heel?

[Ohio HD]

0.0625" higher pin, the compression height. Otherwise longer cylinders or a base plate is needed.

I don't know how close the pistons are to each other at bottom stroke, the M8 does have a 0.500" taller deck height than the TC. That will help.

[cheech]

Already had a set of wheels slip and rods were bad, 4.5 stroke.
New Harley Wheels are $1000

What slipped? S&S or Harley wheels?