Author Topic: Flow matched Fuel Injectors  (Read 1014 times)

0 Members and 1 Guest are viewing this topic.

Offline Jamie Long

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 1314
  • Country: 00
    • Fuel Moto USA
Flow matched Fuel Injectors
« on: February 17, 2020, 09:38:27 AM »
Fuel Moto now carries custom fuel injectors for H-D Milwaukee-8 and Twin Cam applications. Each injector is dynamically flow matched within +/- 1%. Available in assorted sizes 5.3 up to 7.7gm, $149.95 set. Check them out at

Offline 2019CVO

  • Member
  • Posts: 3
  • Country: us
Re: Flow matched Fuel Injectors
« Reply #1 on: April 19, 2020, 05:17:51 AM »

I just bought some parts from Fuelmoto and you put a tune into my T-Max tuner. I got a K&N A/C and FM-09-FLH-HTC header pipe in front of 4.5" Street Cannons as well. I have a 2019 CVO Stage III with the SE498 cam, S&S oil pump and will be putting these things on Monday when the pipe arrives.

A couple of questions if I may? Given the parts list above, what if anything did I do incorrectly and what would you do to improve if I wanted 135 hp, 140+ torque? I have stock heads, no intake or injectors. Again I have the above pipe coming on Monday. Should I have gone to the M8 XXX header? Given the parts list would this have had a negative effect on the performance if I had purchased this instead of the smaller pipe?

Thanks for your input on this forum!