HD 110 piston?

[topcat3815]

Are the pistons in the HD 110 kits compatible with full width rods or are they tapered for use width the tapered wrist pin rods? Thanks for all replies

[Don D]

They are tapered, same as the OEM CVO piston to the best of my knowledge

[topcat3815]

Thank You Don

[koko3052]

If you have the full width rods you can just machine the pistons to fit. Make sure that the piston weights are the same when done.

[Don D]

Easily done, will knock a little weight off. Crank should have been revs lanced and compensated accordingly.