Author Topic: Help Diagnosis Twin Cam  (Read 1926 times)

0 Members and 1 Guest are viewing this topic.

Online Armin

  • Full Member
  • Posts: 154
  • Country: de
Re: Help Diagnosis Twin Cam
« Reply #25 on: March 24, 2020, 04:15:48 PM »
Timesert is the way to go:

http://www.timesert.com/html/hd.html

Armin.
Nothing can ruin a Man's day faster than an Almost-Takeoff!

Offline baggerpaul

  • Full Member
  • Posts: 360
Re: Help Diagnosis Twin Cam
« Reply #26 on: March 25, 2020, 06:32:50 AM »
Back off push rods do a cylinder leak down .may be a bad valve not sealing and or head gasket issuie .had an issuie like this on a 124.
« Last Edit: March 25, 2020, 09:07:57 AM by baggerpaul »

Offline baggerpaul

  • Full Member
  • Posts: 360
Re: Help Diagnosis Twin Cam
« Reply #27 on: March 25, 2020, 08:38:18 AM »
Whoops never mind I see that you got it figured out might have been a better idea to check all the pages .lol dammit sucks to have to fix a pulled stud from the case .Good luck!

Offline Hillside Motorcycle

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 7683
  • Country: us
  • www.hillsidecycle.com
    • www.hillsidecycle.com
Re: Help Diagnosis Twin Cam
« Reply #28 on: March 26, 2020, 04:39:19 AM »
Install all.
Needs to be done in a vertical mill.
Otto Knowbetter's business rules;
1) Mind yours, 2) Stay out of mine.

Offline TorQuePimp

  • Site Supporter
  • Full Member
  • *****
  • Posts: 3043
  • Country: us
Re: Help Diagnosis Twin Cam
« Reply #29 on: March 26, 2020, 08:33:03 PM »
Timesert is the way to go:

http://www.timesert.com/html/hd.html

Armin.

Agreed

If splitting the cases you are looking at $50-$75 in inserts and an hour- hour and a half labor

Cheap insurance.....can be done in a seat and guide machine.....and quick

Offline N456SK

  • Full Member
  • Posts: 160
Re: Help Diagnosis Twin Cam
« Reply #30 on: March 27, 2020, 05:17:04 AM »
Thanks all! Steve