April 18, 2024, 06:03:07 AM

News:

2020 114 cam

Started by Bap227, April 06, 2020, 07:49:06 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Bap227

April 06, 2020, 07:49:06 PM Last Edit: April 06, 2020, 11:09:27 PM by Bap227
Look for a horsepower cam for a 114 m8 engine. A cam for high rpms freeway racer

Hillside Motorcycle

April 07, 2020, 04:27:24 AM #1
S&S .550 would fall into that catagory in that, as an example.
Otto Knowbetter sez, "Even a fish wouldn't get caught if he kept his mouth shut"

Sunny Jim

April 07, 2020, 06:18:43 AM #2
I am going to give the Andrews 464 a crack in my 124.

yobtaf103

April 09, 2020, 12:27:24 PM #3
Quote from: Hillside Motorcycle on April 07, 2020, 04:27:24 AM
S&S .550 would fall into that catagory in that, as an example.
Not a bolt in cam S&S550 ?

Hillside Motorcycle

May 19, 2020, 03:17:26 AM #4
Quote from: yobtaf103 on April 09, 2020, 12:27:24 PM
Quote from: Hillside Motorcycle on April 07, 2020, 04:27:24 AM
S&S .550 would fall into that catagory in that, as an example.
Not a bolt in cam S&S550 ?

Was unaware that it needed to be a bolt-in cam?
OP wanted an hp cam....that is one that will produce hp.
Otto Knowbetter sez, "Even a fish wouldn't get caught if he kept his mouth shut"

Sunny Jim

August 23, 2020, 06:50:26 AM #5 Last Edit: August 23, 2020, 09:50:17 AM by rigidthumper
 So have recently run the Andrews 464 and the CR470.
The 464 works a treat and tunes easily. It is very well mannered.
But if you want endless effortless power, the Cr470 is the bees knees.
User actions
Print
Go Up Pages1