Author Topic: Rockouts For..  (Read 275 times)

0 Members and 1 Guest are viewing this topic.

Offline Deye76

  • Full Member
  • Posts: 8530
  • Country: 00
Rockouts For..
« on: May 07, 2020, 08:27:00 AM »
Do they work on Evo arms? Have a Ultima motor. Thanks
East Tenn.
2014 CVO RK, 2015 RGS, 1992 FXRP

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 3180
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockouts For..
« Reply #1 on: May 07, 2020, 08:35:22 AM »
Kind of a dual question...


 I have kits for Evo engines, but I don't think Ultima engines use stock components (just what I've been told).


 I think the holes in Ultima rocker boxes are too small for inserts to go in. You can verify this yourself by measuring... the holes need to be at least .350 diameter.


In theory it's possible to make the inserts thinner walled but that would make them too weak to be successful.


 Let me know (in PM if you prefer) what you find out & we'll see if we came come up with something  :up:
www.rockout.biz Stop the top end TAPPING!!

Offline Deye76

  • Full Member
  • Posts: 8530
  • Country: 00
Re: Rockouts For..
« Reply #2 on: May 09, 2020, 06:45:45 AM »
How about S&S arms. Thinking of replacing the Ultima with S&S. Thanks.
East Tenn.
2014 CVO RK, 2015 RGS, 1992 FXRP

Offline Rockout Rocker Products

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 3180
  • Country: us
  • www.rockout.biz
    • www.rockout.biz
Re: Rockouts For..
« Reply #3 on: May 09, 2020, 09:36:26 AM »
How about S&S arms. Thinking of replacing the Ultima with S&S. Thanks.

It's not the rocker arms that are the problem. The S&S supports have the same small holes.

If you purchase a kit and find out that they don't fit just PM me &I'll refund your $.
www.rockout.biz Stop the top end TAPPING!!

Offline Deye76

  • Full Member
  • Posts: 8530
  • Country: 00
Re: Rockouts For..
« Reply #4 on: May 09, 2020, 04:12:28 PM »
 :up:
East Tenn.
2014 CVO RK, 2015 RGS, 1992 FXRP