Wheel hub to rotor, HD shims

[barny7655]

These are shims that fit between the Wheel  hub and rotors , fitted them to my deuce  with a lightening alloy wheel , wanting the HD  PN# for them , they arnt very thick 1/16 ? spacers the rotors outwards , not sure as why to there use ?  cheers Barny 

[Pirsch Fire Wagon]

What Model

[rigidthumper]

Disc Rotor Spacer  41814-76
.040" thick spacer is used to re-establish correct rotor-to-caliper alignment and spacing when ever servicing wheels, brake calipers, supports or rotors on Original Equipment disc brake systems from 1973 thru 1984.

[ThumperDeuce]

I had custom spacers machined when I did my wheel change.

[barny7655]

think i have found the PN # 43985-00  stainless hub plates , installed to HD  J04065  instruction sheets for mag wheels

[FSG]

not really shims but hub plates to make things look nice

are you looking at J04065   from 2008 or 2010 (2008 has an error in it)

also check J01956/57/58 and J02276   

[barny7655]

will do  FSG   thanks , since the COD 19 unable to get through to  vintage parts harley site , but will at a later date , cheers [attach=0]