six speed noise

[hogmandon]

When I took it apart the main output shaft was tight and wouldn't move. I packed the shaft full of ice and 15 minutes later it slid right out. The roller bearing on the small shaft had to be cut out. When I put it in it was really tight, not sure how I will put new one in. Maybe put in freezer for awhile. I will be using a Baker complete tranny rebuild kit to put back in.

[kd]

 .... with the double tapered Timkin main drive bearing ? 

[klammer76]

.... with the double tapered Timkin main drive bearing ? 

For a SE transmission that is for 2006 and earlier?

[kd]

Enter your info and see.

https://bakerdrivetrain.com/products/main-drive-gear-bearing-kit

[fbn ent]

.... with the double tapered Timkin main drive bearing ? 

For a SE transmission that is for 2006 and earlier?

Nope....2007 up on baggers

[klammer76]

.... with the double tapered Timkin main drive bearing ? 

For a SE transmission that is for 2006 and earlier?

Nope....2007 up on baggers

That's what I was getting at