2001 fat boy ECM codes?

[86fxwg]

Little issue with diagnostic information. Garage was broken into & all my computers with information were stolen.
So I have a 2001 fatboy with ECM codes p1010 & ECM Cal ID 32761 (not sure that's a code  ) using HD code reader.
Since all my CHIT got stolen I have NOTHING! Can someone point me in a direction?

86

[Coyote]

It's a password problem (between the ECM and TSM/TSSM). Do you have any other codes?

[86fxwg]

It's a password problem (between the ECM and TSM/TSSM). Do you have any other codes?

Nope! Another thing, Bike Does NOT have security, No turn signals either.

86

[Coyote]

So it doesn't have a TSM installed?  That would explain why it can't check the password.

[86fxwg]

So it doesn't have a TSM installed?  That would explain why it can't check the password.

TCM is installed' no turn signals installed on the bike, front or rear. Could that be why?

86

[Coyote]

If it's installed and there are no other codes, then you should check the wiring from it to the ECM. Clean connectors etc.  (this is from the EDM for that  bike). For some reason, they can't "talk" to each other. If the wiring checks out, replace the TSM.

[86fxwg]

If it's installed and there are no other codes, then you should check the wiring from it to the ECM. Clean connectors etc.  (this is from the EDM for that  bike). For some reason, they can't "talk" to each other. If the wiring checks out, replace the TSM.

Thank You.

86