i'm looking for help or suggestions to my cruise control problem

Started by flht1550, September 18, 2020, 09:31:56 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

flht1550

I looking to add cruise to my old 2002 FLHT. can anyone tell me if somebody in the aftermarket would make the brackets to add to a CV carburetor. Two parts one the support the cable and one the mount the throttle shaft.

Hybredhog

    You could buy a older Evo bagger carb with the brackets already on. I believe most all Evo baggers from '95 on had the capability to mount cruise. I just did a '99 FLHT MM to carb conversion, and used a carb from a '95 RK. Jetting falls right in  with a 45 pilot, stock slide hole, n65c or N8EA or close needle, and a 190 main.
'01 FXDXT, '99 FXDL/XRD, '76 FLH

flht1550

yeah, that's probably the way i'll end up going. Just seeing if there were any other options

flhxi2go


Geezer_Glider


Try customizedcycles.com. They have cruise control systems for softails and do make an adapter for cv carbs.

R Meyer