New Darkhorse compensator question

[BigT]

I watched the U-Tube video and it was stated the compensator was designed for a stock motor.  Hopefully it holds up on my 124"!

[BigT]

I attached a picture of the inside section of the compensator that would transfer the torque from the motor to the outside section of the compensator with the gear/chain to the clutch. There doesn't seem to be too much material left there to handle a high output motor. Your thoughts?

[topcat3815]

If you will go to the post  titled (They Did It )and read post # 7 and 10 John at Darkhorse talks about how much Hp there compensator will handle should help you