April 22, 2024, 11:57:37 PM

News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com

8885 Clutch Release Bearing

Started by tolobill, September 24, 2020, 08:02:46 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

tolobill

September 24, 2020, 08:02:46 AM
Hello, is there an upgrade bearing for 2015 ultra limited thanks.

rigidthumper

September 24, 2020, 08:10:33 AM #1
Take some measurements, and then look at this.
While researching, look at 7200B angular contact bearings.
Ignorance is bliss, and accuracy expensive. How much of either can you afford?

tolobill

September 24, 2020, 07:32:08 PM #2
Got it thanks, is there an upgrade to 37906-11 bearing.

rigidthumper

September 25, 2020, 07:06:34 AM #3
Need dimensions to verify- someone says NTN DF07A74CS16, but it doesn't look right, and I don't have the original -11 bearing to measure.
The NTN DF07A74CS16 is 35mm ID, 72mm OD, and 21mm wide.
Ignorance is bliss, and accuracy expensive. How much of either can you afford?

tolobill

September 28, 2020, 03:59:08 PM #4
hello, thanks for the info, thats the bearing number and the stock one 37906-11 are both expensive 75 to 103 dollars and darn near hard to find.
User actions
Print
Go Up Pages1