Has anyone had any success synching led 1156 and 1157 turn signs to the can bus

[codyshop]

I know there's a sequence that lets the can bus BCM accept the lower-draw bulbs as their own without the need for load equalizers.   Ideas?  Thanks

[rigidthumper]

I operate the 4 ways for 30 seconds. From the instructions "The BCM can self-learn if LED turn signals are installed when the Hazards are active after the LED installation. The BCM ignores the first 8 cycles of the hazards. The BCM learns during the next 8 hazards. 16 cycles of the Hazards and the setting are updated in the BCM".