110 tire shredder

[tc1550]

my buddy wants to put a slightly larger cam in his bike 2014 sg special  we were thinking t man 625 will the springs in the heads that come with kit support such lift ? were were not going to remove heads just cams and adustables and retune

[rigidthumper]

No- they're designed for up to .590" lift cams.

[C-Cat]

Larger in lift only. It will be better low end not top.

[Tail Ridr]

A friend of mine is urging me to run a T-man 625 in a 107 because I told him I wanted a nice touring set-up. Had not thought of running a cam with that much lift...?

[Yo_Boss]

my buddy wants to put a slightly larger cam in his bike 2014 sg special  we were thinking t man 625 will the springs in the heads that come with kit support such lift ? were were not going to remove heads just cams and adustables and retune

Andrews 57 would be a better choice.

[PoorUB]

I don't know about the Tman 625, but the Andrews 57 feels a bit soft if you don't bump the compression to around 10.5-1. I would never run it in a stock 103"

[harpwrench]

Does it have a tire shredder kit? 57 wouldn't be great imo

[PoorUB]

I don't know about the Tman 625, but the Andrews 57 feels a bit soft if you don't bump the compression to around 10.5-1. I would never run it in a stock 103"

Sorry, missed the Tire shredder 110 part. What is the compression on that kit? Same answer though, it needs to be 10.5-1 for the 57's.

[rigidthumper]

10.2 advertised.    Measured kits usually come in 10.15 before correcting deck height