66/32 to 66/30 30t trans pulley on 08 softail.

[838]

Stock belt work in this situation?

[Barrett]

It did on my 08 FXDF dyna. There wasn't much adjustment left but the belt hasn't stretched since then.

[shindig]

Evolution industries makes some good trans pulleys.

[rigidthumper]

HD's Trike 30 tooth pulley (83595-11) is almost a hundred dollars cheaper than the EI unit.

[shindig]

That is true.  But Evo's is of better quality and they drill out some of the material in the center to make it lighter.  Like every performance Harley part - application and budget...

[838]

HD's Trike 30 tooth pulley (83595-11) is almost a hundred dollars cheaper than the EI unit.

Will this fit with the stock (66/32) belt?

[rigidthumper]

Fit? Yes.
Proper tension? Maybe- some guys report it's OK with the adjuster all the way back, some say it's a little loose. Do you have 7/16" between the rear of your axle and the end of the adjustment travel?

[DrSpencer]

I did a front pulley swap on my 2007 FXSTC. I swapped from a stock 32T to a 30T.

I used HD belt p/n 40074-07, and it fits perfectly, with plenty of adjustment in either direction.

[838]

I did a front pulley swap on my 2007 FXSTC. I swapped from a stock 32T to a 30T.

I used HD belt p/n 40074-07, and it fits perfectly, with plenty of adjustment in either direction.

Thank you, so are you now 66/30 using this belt?

[DrSpencer]

I did a front pulley swap on my 2007 FXSTC. I swapped from a stock 32T to a 30T.

I used HD belt p/n 40074-07, and it fits perfectly, with plenty of adjustment in either direction.

Thank you, so are you now 66/30 using this belt?

Stock rear (whatever that tooth count may be) and 30T in the front.

[838]

It looks like these belts are for "Japan Bikes". And 1 tooth shorter.  132 vs 133.

[shindig]

Hit up Ben at American Prime Manufacturing.  He can help you out.

[Weyrider]

I am going to try the 30/68 setup, this will give me a 3.06 final ratio. I have a 96 ci 2009 Street Bob with an Andrews 57 advanced 4 degrees. I am going to try the Tri Glide 30 tooth front pulley with the Sportster 68 tooth rear wheel pulley. I will have to wait till spring to make the swap as we are running out of good riding weather here in Minnesota and I don't want the bike down when I can ride.