May 08, 2024, 04:08:09 PM

News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com

2002 FLHT front wheel

Started by flht1550, December 14, 2020, 01:35:44 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

flht1550

December 14, 2020, 01:35:44 PM
I'm wondering if a  16" front wheel from a FLH could  have the 5/16 threads drilled out and taped to 3/8 and be ran on the rear ? I understand it's not the correct way to do things but wondering if anyone here has done it.

fleetmechanic

December 14, 2020, 02:15:35 PM #1
Check the spacing of the holes around the hub and also the width of the two different hubs.

rigidthumper

December 14, 2020, 02:37:18 PM #2
Not enough meat for the drive side pulley bolts.
Ignorance is bliss, and accuracy expensive. How much of either can you afford?

djl

December 16, 2020, 07:53:00 AM #3
I drilled and tapped an 18" Airstrike front from '10 FLHX on the rear of an '02 FLHT. Had to adjust brake side space to center the wheel IIRC.
User actions
Print
Go Up Pages1