Author Topic: Rekluse Torquedrive.  (Read 560 times)

0 Members and 1 Guest are viewing this topic.

Online 838

  • Full Member
  • Posts: 530
  • Country: us
Rekluse Torquedrive.
« on: November 21, 2020, 04:42:04 PM »
Can this system hold 140 ft/lbs?

Offline kd

  • Site Supporter
  • Full Member
  • *****
  • Posts: 8595
  • Country: ca
Re: Rekluse Torquedrive.
« Reply #1 on: November 21, 2020, 05:06:41 PM »
Just for the hell of it I did a search.  I couldn't find anywhere that they (or anyone) indicated or even hinted how much it will hold. I find that strange.  Kinda makes it a crap shoot. That said, almost any clutch can probably hold 140 with a hat on.  It'll just slip in the lower rpm's and it will probably be a bear to pull in the lever at high RPM.   

I would go straight to a Bandit Sportsman.  They WILL hold 140 ft. lbs. with ease. I know that's not what you asked but you've been hanging around this forum long enough to know the Bandit may be the most recommended clutch available.  No need for a hat or wrist burning spring pressure.  Mine is holding 149 hp / 145 ft. lbs. in a heavy RGU and I DO beat on it every time it's out.
KD

Online shindig

  • Full Member
  • Posts: 61
  • Country: us
Re: Rekluse Torquedrive.
« Reply #2 on: November 21, 2020, 05:45:02 PM »
Yes it will

Offline HighLiner

  • Site Supporter
  • Full Member
  • *****
  • Posts: 1418
  • Country: us
Re: Rekluse Torquedrive.
« Reply #3 on: November 21, 2020, 09:43:15 PM »
I think itís the clutch Moonshine Harley uses in their builds. 

Offline C-Cat

  • Full Member
  • Posts: 364
  • Country: 00
  • FFF
Re: Rekluse Torquedrive.
« Reply #4 on: November 22, 2020, 01:28:07 AM »
Running Rekluse clutch in a 107 and now 110, holds awesome without a lot of spring (SE) I think it will hold 140 TQ as is. Definitely with a heavier spring.
124ci. 07 Streetbob 161/145
110ci. '11 Roadglide  129/127

Offline HD Street Performance

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 9649
  • Country: 00
    • HD Street Performance
Re: Rekluse Torquedrive.
« Reply #5 on: November 22, 2020, 05:26:07 AM »
I sell the RMS-285 (application specific per year) with most builds, good up to 160#. They have versions that can take much higher up to 220 ft/lbs. they will build. The lever pressure goes up proportionally. The lever pull on the standard model is lighter than stock.

Offline Tireman

  • Full Member
  • Posts: 254
  • Country: 00
Re: Rekluse Torquedrive.
« Reply #6 on: November 22, 2020, 06:36:58 AM »
I sell the RMS-285

What's the difference between the RMS-284 ?
1984 FLHS 80" 57/61..2009 SG MegaFlo 124"152/154..2011 TG  MegaFlo 108/110

Offline HD Street Performance

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 9649
  • Country: 00
    • HD Street Performance
Re: Rekluse Torquedrive.
« Reply #7 on: November 22, 2020, 07:07:51 AM »
Same basic unit, applies to different years. RMS-285 is with slipper assist, RMS-284 is without. See page 805 Fatbook