March 28, 2024, 07:27:03 AM

News:


Harmon Kardon Gasket Orientation

Started by scootertrash1, February 19, 2021, 07:52:45 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

scootertrash1

What is the proper gasket orientation for the stock Harmon-Kardon head unit for a 2010 Ultra? Ribs facing forward or rearward? Looks like at one point the gasket was glues on? Every time I slide the unit in, the gasket bunches up around the mounting bracket. I have loosened the fairing upright enough where I may be able to gain a little clearance sliding the stock radio back in.
Thanks!

scootertrash1

I actually installed the ribbed portion of the gasket closest to the opening for the face of the radio (facing rearward of the motorcycle). I pushed the radio far enough in where the face was past the mounting bracket. Using orange wood sticks, I was able to install the gasket on radio, pushing further back on the unit as I pushed the radio home. Worked pretty well and should have a functioning water seal! Seems it always rains when I take a scooter trip......

Coyote

Ribs to the front of the radio. That's what is suppose to stop the water. I use a little spray adhesive to tack the gasket back to the radio.