Author Topic: Comment bearing or not  (Read 916 times)

0 Members and 1 Guest are viewing this topic.

Offline kcbike

  • Full Member
  • Posts: 110
  • Country: us
Comment bearing or not
« on: March 22, 2021, 06:46:26 PM »
Would you have timken crank bearing installed in a 2021 milwaukee 8 when building a 130 c.i. hot rod ?

Offline dsvracer

  • Premium Vendor
  • Full Member
  • *****
  • Posts: 321
  • Country: 00
    • dan vance racing
Re: Comment bearing or not
« Reply #1 on: March 23, 2021, 05:59:39 AM »
yes. it would be a good idea to do the timken conversion with that big of a motor.
FAST NOT FICTION
www.danvanceracing.com

Offline Buglet

  • Full Member
  • Posts: 983
Re: Comment bearing or not
« Reply #2 on: March 23, 2021, 09:16:35 AM »
   Yes I would have it done and your choice for having it done is easy as there is only one place that I know of that does it right.

Offline Dan89flstc

  • Full Member
  • Posts: 1642
  • Country: us
Re: Comment bearing or not
« Reply #3 on: March 23, 2021, 06:52:08 PM »
   there is only one place that I know of that does it right.

Why don`t you enlighten us as to who that might be?
 
1989 FLSTC 2016 FLHR
2019 FLHT

Offline Buglet

  • Full Member
  • Posts: 983
Re: Comment bearing or not
« Reply #4 on: March 24, 2021, 05:31:28 AM »
  Being just about all the shops send there cranks to them and most shops should agree. Send it to Darkhorse.

Offline ziggy24

  • Member
  • Posts: 28
Re: Comment bearing or not
« Reply #5 on: March 24, 2021, 08:37:11 AM »
  Being just about all the shops send there cranks to them and most shops should agree. Send it to Darkhorse.



Dragos Bike Works also does a double timken setup.....


https://www.dragosbikeworks.com/crankwork.html

Offline ziggy24

  • Member
  • Posts: 28
Re: Comment bearing or not
« Reply #6 on: April 02, 2021, 08:12:51 AM »